Experimental Ability:
Single or multi-cylinder engines
Naturally aspirated or supercharged engines
Measure the air flow of the engine, hose, or leads
Air Compressors
Research and development.
The nozzle flow meter or any of the optional flow meters quickly andeasily fit into place between the adaptors in the base unit of the apparatus. For use by all kinds of engineering students, the Flow Meter Calibration apparatus compares and shows the accuracy and use of fundamental flowmeters. The manometers have a common manifoldfitted with an air valve. Students use the hand-pump to increase the air pressurein the manifold. The straight pipe gives a comparison of the true pressurelosses caused by the flow meters. Four water filled manometers show the pressure differences at the flow meterand across the overall flow meter assembly. This helps to explain the boundary layerand surface friction in pipes and flow channels. The optional Pitot Tube Flow Meter will alsoshow the velocity profile in a pipe.
....
Flow Meter Demonstration
....
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 3.5 LPM, for medical oxygen.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Inlet and outlet connectors DISS style, other types of connectors available upon request
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Maximum flow rate when fully opened: 50 L/min (depending on supplied model).
Pressure compensated design to give specified accuracy for whole range of input pressures
Built-in inlet filter (depending on supplied model).
Adjustment knobs to have rough surface to prevent slipping.
Medical gas flow meter (Thorpe tube design) to regulate and measure theflow rate of medical gas supplied to a patient, maximum flow rate 8 LPM,for medical oxygen.
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Pressure compensated design to give specified accuracy for whole range of input pressures
Built-in inlet filter.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Maximum flow rate when fully opened: 50 L/min.
Inlet and outlet connectors DISS style, other types of connectors available upon request
Adjustment knobs to have rough surface to prevent slipping.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Graduation shall have over 270 degrees of visibility.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Pressure compensated design to give specified accuracy for whole range of input pressures
Built-in inlet filter (depending on supplied model).
Inlet and outlet connectors DISS style, other types of connectors available upon request
Can be cleaned with damp cloth and a disinfection solution.
Needle valve and body constructed of brass or aluminium.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Maximum flow rate when fully opened: 50 L/min (depending on supplied model).
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 15 LPM, for medical oxygen.
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Pressure compensated design to give specified accuracy for whole range of input pressures
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Built-in inlet filter (depending on supplied model).
Maximum flow rate when fully opened: 50 L/min (depending on supplied model).
Adjustment knobs to have rough surface to prevent slipping.
Inlet and outlet connectors DISS style, other types of connectors available upon request.
Hydraulics Bench Chronometer Digital Flow Meter
....
Medical gas flow meter (Thorpe tube design) to regulate and measure the flow rate of medical gas supplied to a patient, maximum flow rate 5 LPM, for medical medical air.
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Pressure compensated design to give specified accuracy for whole range of input pressures.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Medical gas flow meter (Thorpe tube design) to regulate and measure theflow rate of medical gas supplied to a patient, maximum flow rate 5 LPM,for medical oxygen.
Transparent, graduated (metric system) column, shatter resistant polymer certified for medical use.
Graduation shall have over 270 degrees of visibility.
Needle valve and body constructed of brass or aluminium.
Thorpe tube design flow meter using DISS input connector for panel /regulator mounting.
Can be cleaned with damp cloth and a disinfection solution.
Inlet and outlet connectors DISS style, other types of connectors available upon request
Adjustment knobs to have rough surface to prevent slipping.
Calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure.
Inlet pressure (nominal) > 50 psi (345 kPa / 3.45 bar), peak inlet pressure at least 100 psi (690 kPa / 6.89 bar).
Pressure compensated design to give specified accuracy for whole range of input pressures.
2 measuring locations for vertical or horizontal installation of the flow meters under test
Electromagnetic flow rate sensor for reference measurement
Comparison and calibration of different flow meters
DC voltage source to supply the flow meters with auxiliary power
Flow meters available as accessories
Water circuit with tank, pump and valve to adjust flow rate
1 differential pressure sensor and twin tube manometers for measurement of pressure losses.
Orifice Plate Flow Meter with electronic differential pressure transducer for flow rate measurement as accessory
Vertical and horizontal installation possible
Connections to facilitate pressure loss measurement
Connections to supply auxiliary power via
Operation based on the differential pressure method
Display indicating differential pressure.
Non-contact recording of rotation speed by ring magnet and Hall sensor
Display indicating flow rate
Paddle wheel flow meter as accessory for trainer
Vertical and horizontal installation possible
Connections to supply auxiliary power via
Connections to facilitate pressure loss measurement.
Flow Meter Demonstration Unit is a self-contained apparatus to demonstrate the attributes of flow meters utilized in measurement of water flow via pipes or open channels. Metering devices available in different combinations to suit coursework. Reference turbine flowmeter permanently fitted. Service module with reservoir, volumetric measuring tank & pump.
....
