Flash spun polyethylene creates barrier to particles, micro-organisms and non-hazardous liquids
Elastic opening
Serged seams
Suitable for use in controlled environments with high standards for particle and microbiological contamination control (pharmaceutical, biotech, medical device and electronic settings).
Gripper PVC soles
Should not be worn around open flame, heat source, sparks or ignition sources.
Functionality of moving parts preserved
Unit designed for desktop use
Cutaway model of a gear pump
Mounted on base plate; 350x300mm
Refurbishing your old-version Contactless Torque Meter is a cost-effective alternative to replacing costly equipment.
Refurbishing Work
Replacement Of Torque Sensor (Transducer)
Adding of an analog output mounted on a BNC plug
Adding of two DEL indicators for clockwise/counterclockwise
Installation of electronic contactless transducer (50/0-30 Nm)
Adding of an electronic board for digital torque readout
Complete Console Disassembling
Housing mechanical repair if required
Sand blasting and painting
Complete Testing And Verifying
Inspection report and quality control
Electrical and mechanical testing.
The Uterine Balloon Tamponade (UBT) is a sterile, single-use medical device designed to control postpartum hemorrhage (PPH) by applying pressure to the uterus, thereby reducing blood loss and stabilizing the woman undergoing the condition. The balloon is inserted into the uterus, filled with saline solution or sterile water, and effective tamponade occurs rapidly to stop the bleeding.
Uterine balloon tamponades (UBT) are medical devices that apply pressure to the uterus to reduce blood loss, stabilize the woman undergoing postpartum haemorrhage (PPH), and reduce the need for surgical interventions and blood transfusions.
It is used for electro-physics and electronic technology teaching and research in colleges, secondary vocational schools and various schools, as well as, it is used as special purpose experimental econometric tools in scientific research units. It can simultaneously produce sine wave, triangular wave and square wave, with digital display output signal frequency.
Product dimension (L*W*H CM): 24.5*19*10.8
It is for understanding the ‘hour, minute, plus and minus in primary school teaching. It is three -pin- interlocking. Diameter is 100mm.
....
For use in controlled environments with high standards for particle and microbiological contamination control:
Medical Device
Electronics
Pharmaceutical
Biotech
Light and durable
Coveralls provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Bound seams reduce the potential for particle penetration.
Spun polyethylene creates barrier to particles, micro-organisms, and non-hazardous liquids
Covered elastic wrists and ankles with dolman sleeves
Zipper closure
Lowest level particle shedding
Bound seams and neck
Should not be worn around open flame, heat source, sparks or ignition sources.
Functionality of moving parts preserved
Unit designed for desktop use
Cutaway model of a standard gas meter
Mounted on demonstration panel; 500x400mm.
The modelis sectioned to show its component parts and operation mechanism. Students caneasily understand and observe automotive mechanism, such as engine generator,motor, reduction gear and drive shaft. This is a cut-away model of automobile chassis called Hybrid System Car. 2 different types of power source, gasoline engine and 3-phase AC electric motor, are operable and the operationis displayed on the rear panel. The model is designed to operate by electric motor. Students can perform andobserve the operation of engine and/or motor by on-off switch on the frontside. Various operation principles like starting,normal running, high load, reducing speed and reverse are also explained on therear panel. HV Battery Assembly is installed on the back of an engine. The wiring including LED Lamps clarifies an electric flow.
....
The Resistor Reduced Voltage Starter 60 HZ is a reduced-voltage three phase starter that uses one or many resistors in series to start a motor to obtain given torque measures or limited current values. Used in electrical engineering technology teaching when an AC stator-resistance starter is required, the starter unit is housed in a full-size totally enclosed portable modular unit. This permits the utilization of banana-type jumper leads between the single phase power supply and other components in the circuit. Specifications and/or diagrams are silk-screened on the back of a clear-plastic front panel for ease of identification. It is equipped with thermal protection facilities, a start-stop push-button station and two pilot lamps indicating respectively the supply, the run state of the motor driven and an adjustable time delay. Connections to the unit are made through 4 mm standard color-coded, five-way binding posts. The trainer is protected by a either a diode or thermal-magnetic circuit breaker. Requires a 120/208V 60Hz circuit.
Educational Advantages:
Used in electrical engineering technology teaching when an AC stator-resistance starter is required
Three phase unit
Indicates respectively the supply, the run state of the motor driven and adjustable time delay
Sachet, transparent, virgin polyethylene, self sealing with interlock type closure on 1 short side, securely sealed along the 2 long sides.
Plastic Tablet bag, sealable with interlock type closure, 10 x 16cm, pack of 100.
It can continuously produce 5KV~50KV high voltage pulse, not only can be used to demonstrate high voltage spark discharge, but also can be used as pulse high voltage power supply needed by electrical resonance demonstrator, electric spark hodoscope, gas discharge tube and CRT.
....
It is used for school class teaching demonstration, and is used to teach student to read household mechanical water meter correctly. It can use finger to adjust the hands of meter and preset reading.
....
Full face opening
Ties with loops for adjustable fit
Bound seams are covered with garment fabric for reinforcement
Bound hood opening for lower particle shedding
Open face hoods provide an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash. Available in non-sterile, clean-processed, and sterile versions.
One size fits most
Available in bulk packaging with double transparent poly liners
Available in non-sterile, clean-processed, and sterile versions
Clean-processed garments Class Cleanroom 4 standards.
Unit designed for desktop use
Functionality of moving parts preserved
Cutaway model of an underground hydrant
Mounted on base plate; 400x400mm.
Engines can be supplied with fault insertion boards, this allows arange of open circuit and high resistance faults to be inserted, designed toaid teaching diagnostics, fault finding and troubleshooting. Self contained fully operational motorbikeengine rigs. Complete with start, charge, fuel, air-intake, cooling and exhaustsystems. Pin-out facility on allsensors and actuators 2mm sockets enabling real-time values to be takenwithout compromising the wiring harness. The engine rigs are manufactured to replicate the engine bay of thedonor bike.
....
Material: Shaft and outsole: PVC
Heavy duty boots (Wellington boots)
Lining: Polyester fiber facilitates slide-in and removal
Waterproof
Reusable
Oil- and fuel oil resistant
Color: Shaft: white or green
Color: Sole: green or black
Size: 44 (EU)
Length shaft: approx. 38 cm
Junior Middle School Teaching Power
....
A lightweight, and durable fabric, utilizes the strength of DuPont Tyvek fabric and a polyethylene coating. fabric provides at least 30 minutes of protection against 42 chemical challenges.
Sleeve. 18 in. Long. Elastic at Both Ends. Bound Seams. Yellow.
Used for light splash protection in a variety of industrial environments, including petroleum refining, pulp and paper manufacturing, food processing, chemical processing, and pharmaceutical manufacturing.
Functionality of moving parts preserved
Cutaway model of a safety valve
Unit designed for desktop use
Mounted on demonstration panel; 400x300mm.
