This trainer has a modular structure and it consists of panels installed on a vertical frame. It is supplied with atheoretical and practical manual. Industrial type components are educationally adapted by using a modular panelsystem to permit the step by step assembling from the simplest circuit to themost complex system. This laboratory is designed for the study of Flow control application to allow thestudent a practical training, based on the performance of guided experiments. The modularity of this system cangive the students a direct and immediate approach to the topics, offering theopportunity to study various subjects, performing several experiments asfollowing:
Analysis of flow control features
Measurement systems features.
Distillation is a separation process that includes the partial evaporation of a liquid phase and the condensation of the resulting gas phase. The rectification columns are used for the separation of liquid phases. They operate according to the principle of distillation. The substance mix recommended for the operation of the experimental plant is water-ethanol. The separation process of rectification is an energy-efficient distillation process with several stages.
Learning objectives/experiments:
Determination of the proportion of ethanol in the feed and in the products
Determination of the tray efficiency of the sieve trays
With different reflux ratios
With different feed levels
Investigation and comparison of a sieve tray column and a packed column
Evaluation using the McCabe-Thiele Diagram
In continuous operation
With different pressures.
The Temperature Process Control Learning System includes a heavy-duty, welded steel workstation with industrial quality components, which are mounted and plumbed in two water flow circuits, a process loop and heating loop, to control the temperature of water flowing in the process loop. Temperature Process Control Learning System allows learners to study and practice calibrating, adjusting, installing, operating, and tuning thermal process control systems in industrial applications. All electrical components are connected to the control panel to allow students to measure signals and connect the devices in a wide variety of control configurations including PID control, on/ off control, and manual control. Process control systems provide precise control of liquids and gases in a wide variety of industrial applications including food processing, chemical manufacturing, and bio-technology.
Features:
Refrigeration-Based Cooling
3 Types of Temperature Sensors
Industrial Quality
Student Reference Guide
PLC Compatible
Extensive Instrumentation.
The elements are connected to each other via pivot joints. The positions of the pivot joints can be varied to adjust the crank radius, oscillation radius and coupling length. The experimental unit comprises the drive disk with the crank and coupling and the output disk with the rocker. The drive disk can be driven by the crank. The unit can be used to investigate the crank-rocker mechanism, the double rocker mechanism and the double crank. The Four-Joint Link is a four-bar pivot gear. It converts rotary motion into oscillating motion.
Features:
Conversion of rotary motion into oscillating motion.
The Plastics Technology 1 Learning System includes a temperature control system, 4 oz. shot material feed system with electro-pneumatic control, dual heater system, barrel and nozzle, safety enclosure, heavy-duty workstation, 8 ton clamping system, mold offset plates, set of injection starter molds, interactive curriculum for both theory and lab, and a teachers assessment guide.
Plastics Technology 1 Learning System is designed to teach modern technical skills in plastics and polymer science using injection molding. Understanding how to work with plastics is an important technical skill for engineers, technicians, and operators. They impact virtually every aspect of modern industry.
Learners will practice skills such as setting the temperature and pressure for a molding operation, troubleshooting molding operations, mounting and aligning molds, operating an injection molding machine, determining the runner and sprue diameter for a specific plastics mold, designing a plastics part and mold based on shrinkage and warpage considerations, using CAD/CAM with mold design, and multi-cavity mold design and operation.
Features:
Plastics Product Design
Plastics Problem Solving
Industrial Quality Plastics Machine
Written and Multimedia Style Cirriculum.
The pressures, temperatures and air flow rate are recorded by a combination of instrumentation on the Compressible Flow Range base unit and the optional module. A digital hand held manometer is supplied.
A series of four straight tubes of different diameters with end pressure tapings allow pressure losses in a straight pipe to be investigated at a range of Reynolds numbers. Bends, sudden enlargements and contractions are included to allow investigation of pressure loss and recovery.
The unit is driven by an ejector (jet pump) allowing investigation of entertainment ratio and ejector performance.
Benefits
Built-in safety measures
Complete and ready-to-use system
User-friendly operations and control software
Features:
PLC integrated safety and control system, 24V DC powered
Independent burner control
Combustion chamber
Specimen holder
Light-source control 5V DC switch mode power supply
Convection cooling
Ignition system
Photometric system
Thermocouple type K interlock for main and auxiliary burners
Fan and exhaust damper control
Various built-in safety measures including over-voltage and over-current protection
Control unit, including smoke meter
Exit Sign software.
The Digital Strain Display accepts up to 16 channels from strain gauges connected in quarter, half or full bridge. The display is fully programmable to match the strain gauges and their bridgeconnections. The display includes precision internal make-up resistors towork with half bridge connections if needed. For quarter bridge connection youneed suitable external make-up resistors or dummy gauges. For use with most types of metal-foil strain gauges, the Digital Strain Display connects to most types of strain bridge connections togive direct readings of strain. Two channels includeadditional individually adjusted dynamic outputs. They can connect to suitable instruments, such as an oscilloscope or a chart recorder for measurement oftransient strains. Alsosupplied is a tool that crimps the connectors to the cable. The connectors areself-locking, reliable, and secure and need no soldering. Supplied with the Digital Strain Display is a reel of cableand connectors to fit the input sockets of the Digital Strain Display.
Channels:
Channels 15 and 16 may also be used for dynamic strain output. Sixteen all channels may be used for slow-changing or staticstrain measurement.
Computer interface unit and software are included. The Parabolic Arch Fixed Ends Computer Interface set has the same accessories as except Moment Support and Horizontal Force Support are replaced by Moment Load Cell and Horizontal Force Load Cell.
....
Solar heat for cold production allows the vapour jet compressor from vapourjet compressor IN refrigeration to be operated with solar-generated heat fromthe domestic water heating with flat collector flat collector. With the increasing demand for refrigeration and air conditioning worldwide, theinterest in alternative processes of cold production which can be supplied from renewable energy sources is also growing. One promising possibility is thermalprocesses. In these processes, thermal energy is used to generate cold. The pump is operated via Vapour jet compressor inrefrigeration and domestic water heating with flat collector are connectedby hoses. The energy added from solar heat is determined by two temperaturesensors and one flow rate sensor. After sufficient solar thermal heating, the heat transfer fluid from domestic water heating with flat collector is pumped into the vapour generator of vapour jet compressor in refrigeration by the pump from solar heat for cold production.
....
Features:
Support for multi-language user-interface extendibility.
Complies with standard requirements of torsion and compression, as well as a variety of destructive, non-destructive and multi-cycle tests.
Support for multi-level elastic modulus tests.
Characteristic testing data can be marked on testing graphs.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Rounding off of numerical testing data complies with Rules of Rounding Off for Numerical Values, supports rounding off in sections and custom rounding off.
As many as 20 layers of sensor linear compensation, elevates the precision of the instruments to the next level.
Capacity 5000kN
Load measurement range 0.4%100%
Load measurement accuracy 1%
Load resolution 1/500000 of Max capacity, no stepping, no change in full scale
Piston displacement measurement accuracy 0.5%
Piston speed adjustment range 0.140mm/min
Piston travel of vertical cylinder 200mm
Horizontal shear capacity 1000kN
Horizontal piston travel 250mm
Rotation lifting capacity 300kN
Upper/lower compression platen distance 1000mm(or customized)
Compression platen dimensions 820mm820mm
Axial deformation measurement range 010mm
Lateral deformation measurement range 010mm
Horizontal shear deformation measurement range 0150mm
Frame dimensions 490012003000mm3
Hydraulic system dimensions 1040720975mm3
Power supply 11kW/AC380V/50Hz
High coaxial degree.
Special differential circuit, power and peripheral interface full isolation design, anti-interference ability
Through the special differential circuit with FPGA internal pure hardware high precision digital displacement device makes test results more accurate and reliable;
FPGA, Single Chip and with 100 m data processing speed to make sure data wont be missed
7 inch TFT industry true color touch display, graphics beautiful, operating more humanization;
Collecting and processing data at the same time, Control stability efficient
Two way and a high precision AD collection, stamping load and clamping force is more exquisite,
Electrical design satisfy EMC safety standards
limit position protection, full scale overload protection function.
Capability of mechanics testing on various metal materials. e.g. Metal tension, compression, bend, shear, etc.
Capability of mechanics testing on various nonmetal materials. e.g. Wire tension, plastic bending, cable peeling, etc.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing assignment.
Support for multi-language user-interface extendibility, pre-installed.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Support for displaying a single curve of a specimen or the overlay of multiple curves.
Dynamic display of load, displacement, time and real-time testing curve on the screen.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing control procedures and a wide range of instruction types. Also supports dynamic instruction parameter assignment.
Capable of holding on maximum load or displacement.
Support for compression tests on various metal or non-metal materials to inspect their mechanics performances.
Closed loop control of channels such as load, displacement, etc. Smooth switching in between.
Constant loading speed test supported.
Features:
Capable of communications with a computer, enabling computer software controlled operations.
Specially designed control panel, beautiful and easy-to-use.
160,000-color true-color touch screen for display and operate, featuring a beautiful and user-friendly interface.
Impact energy displayed intuitively on the LED screen in a large font size.
Software logic protection on installing, latching, unlocking and releasing, eliminating operation mistakes.
Integrated with a large storage for testing data recording and saving.
Support for automatic/manual printing.
Automatically sustains when it reaches the specified value.
Capable of sustaining at the maximum torque, rotation and grip load.
Options for displaying curves including torque-rotation, torque-grip load, grip load-rotation.
Dynamic display of torque, rotation and real-time testing curve on the screen.
Control over loading speed of torque and rotation, no stepping for loading speed.
Integrated with travel limit protection and full-scale overload protection.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
Support for setting a target value on torque, rotation and grip load at will.
Support for data searching. Returns the corresponding data at y-axis when entered the coordinate at x-axis.
Support Excel report templates and customized editing of test reports.
The vertical and the horizontal two-way hydraulic cylinders are designed to form a complete unit. The span of the horizontal rollers may be adjusted freely and simultaneously. The series of programmable flexure testing machine is mainly designed for flexure tests on steel plate specimen. The two rollers are capable of 180à Â ° flexure tests. Flexure tests can be performed automatically or manually. This product features an integrated main frame.
This product emits little noise, consumes little energy and fulfills the requirements of energy saving and environment protection.This product features an appropriate structure and layout, as well as an ergonomic design, making it more convenient to operate. This product adopts the plug-in flexural center installation style, presenting an efficient design that requires a small footprint.
Main applications: Quality control department, iron forging, civil aerospace, higher education, science research department, arbitration department, technical supervision department and etc.
This Series creep testing machine applies advanced servo motor and ball screw actuator which assure loading conveniently and simply. The drive system comprises a printed circuit motor with toothed belt and gearbox to the recirculating ball screw actuator.
Control system owns the three closed control function as load control, extension control, and velocity control. High precise control and accurate load with load measurement resolution reach 1/300000; the loading testing curve can be plotted automatically.
Numerous high temperature pull rods, specimen holders, furnace systems and extensometers available for creep and stress Relaxation applications. Many of which are also adaptable to hot tensile testing applications on universal testing machines.
Motorized draw-head assembly automatically compensates for specimen elongation and keeps loading bar with excellent load accuracy of +/- 0.5% guaranteed.
Both room temperature and elevated temperature systems are available
Furnace and chambers available with temperature ranges from 200C to 1100Cin common air environments.
Integrated with travel limit protection and full scale overload protection.
Features a large test space that satisfies both GB requirements (longer than 60 times the specimens diameter), as well as American and European requirements (not less than 2.4 meters).
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Support Excel report templates and customized editing of test reports.
Real-time drawing of curves of remaining load with time, or temperature with time.
Algorithm to predict specimens stress relaxation performance after 1000 hours (or any specified value in hours), with the option of single or double logarithm. Capable of predicting with standard specimen data or real-time collected data (Suggested). Integrated with an extensive specimen library to improve the precision and reliability of testing results.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
Open testing report, support custom testing template, automatic generation of testing report, which can be printed, previewed or saved as files.
