Daily Ice Making Capacity: 20kg/24h
Water Tank Capacity: 1L
Automatic Overflow Protection
Ice Shape: cube of approx. 13gm each
Installation: Freestanding Air Cooled
Minimum Cycle Time for First Ice Made: 30 minutes
Nonremovable ice bin
Voltage: 220V-230V/50Hz
Ice Bucket Capacity: 4kg (approx. 310 ice cubes).
Used for various clinical and laboratory purposes.
Tube material: Polypropylene.
Plastic handle stick.
Sterile, individually packed in a tube.
Rayon/cotton tipped.
Length:12cm.
Vaccine storage capacity: 2.9 litres
Vaccine carrier, Extra-large, Long range
With lid and shoulder strap.
Cold life at 43°C without openings: 51 hours 8 minutes
Supplied with 4 x 0.6L icepacks as a standard.
Weight fully loaded: 5.36 Kg.
Vaccine storage capacity: 100L
Volume category: >/= 60, < 120L
PQS Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF- Grade A
Refrigerant: R600a, 80 grams
Equipment operating voltage and frequency: 220-240 Volt and frequency 50Hz / 60Hz, 1ph.
Vaccine storage capacity: 220 L
Volume category: >120L
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
Refrigerant: R600a, 65 grams
PQS prequalified Solar direct drive refrigerator with no battery for storage of vaccines at +2 ?C to+8?C in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
The single-use, User-programmable Temperature Data Logger (UTDL) with an USB interface for data download, analysis, and programming of device settings via a PC. The device shows any temperature alarms that have occurred via a multicolour LED indicator.
Device settings, such as alarm thresholds, logging interval etc., can be programmed by the user via the Plug and Play Configuration Tool software or factory programmed. The device is factory programmed with generic settings by default and if other factory-programmed settings by Honeywell are required, such settings need to be specified upon ordering.
When connected to a PC via the USB interface, the device automatically generates a PDF report showing the recorded temperature data and alarms without the need for additional software.
Biodegradable carrier bag, printed with 4 colors, pack of 20.
....
The device may be used in a healthcare facility, doctor's office, or in the home. This is a single-use device. A hand-held device used to displace the tongue to facilitate examination of the surrounding organs/tissues. It is typically a double-ended flat device with rounded working ends made of wood.
....
Newborn simulator to facilitate learning complete newborn care,including cord cutting and ligation, as well as newborn resuscitation, dark complexion
Texture of the simulator: soft and smooth, friction free to demonstrate the desired procedures. Realistically sculpted to resemble and simulatea baby, anatomically accurate and feeling smooth / resilient / bony as relevant and suitable for simulation.
Simulator consists of a dark skin manikin, that has an appearance andsize of full term infant with umbilical cord.
Material of the simulator: TPU (primary Thermoplastic polyurethane - TPU (primary material for body skin), Poly vinyl chloride - PVC (primary material in chest and face skin) silicone rubber, Polyoxymethylene - POM, Polypropylene - PP, and iron/steel.
Material: Nickel plated brass.
Pin, safety, medium size, for securing wraps and bandages.
Length: medium size, 40mm.
High performance, high quality, single piston portable foot-operated suction pump
For pharyngeal and tracheal aspiration, and other minor medical procedures
Piston, with diaphragm valve, is sealed with removable elastic O-ring
Large stable base is entirely fit with anti-slip, preventing the pump from gliding-away while in use
Vacuum, maximum: - 70 kPa (ca. - 700 mbar)
Pedal movement generates suction every time it’s depressed
Integrated spring, returns the pedal to its initial ready-to-use position
Lever minimises pedal force required to reach maximum flow
For operator’s comfort, pedal should support at least 20 cm of the foot, and distal-end displace maximum 9-11 cm
Container is transparent, allowing assessing collected volume
Wide opening at the top of the container allows for easy and thorough cleaning
Basic essential design without manometer
Air-flow, maximum: 30 to 40 L/min (such as at two pumping strokes per second)
Collection capacity container: 900-1100 ml
Operating temperature range: -20 C to +50 C
All parts can be autoclaved at 121 C
The suction pump set can be entirely disassembled, facilitating proper cleaning and disinfection.
Materials:
All parts are manufactured from high-strength, durable material, not requiring specific maintenance or storage conditions
Foot pedal: aluminium or equivalent sturdy plastic, fit with embossed anti-slip relief
Conical suction tip: Acetal or equivalent tough plastic
Aspirating tube: silicone rubber
Container: transparent polycarbonate or equivalent sturdy transparent plastic
Bottom: rubber or equivalent anti-slip material
Gasket, O-rings and valve diaphragm: silicone rubber or equivalent
Piston O-ring: Teflon or equivalent.
For transverse occlusion of a section of intestine while suturing, resection or ananastomosis.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15-0.20% carbon, 12-13% chromium.
Reusable.
Occlusion: The form and mechanical action must permit precise closing.
Adhesion: Provided by the surface of the jaws.
Smooth, springy jaws with atraumatic longitudinal serrations.
Length: 23 cm.
Pressure force instrument: intestinal clamp, springy
Non-crushing clamp, curved.
Long jaws and shorter shanks.
Material: polyester /cotton fabric (50/50%, 65/35%, 67%/33%) or 100%cotton fabric
Unisex medical coat with long sleeves
Washing: normal; resists to chlorine 0.1%
Snap closure or button front closure
Two patch pockets and a chest pocket
Notched lapel collar
Multiple use
Mid-thigh length
Color: white
Weight per m2: 175g-240g
Baby, child and adult portable length/height measuring system consists of a) portable baby length measuring board and b) portable child/adult height measuring board; made of durable plastic, not stand alone, but requiring a wall/hard structure to lean against to ensure stable measurement.
Portable baby, child and adult length/height measuring system.
Paper: Inside, FSC certified 115 GSM Matt Coated. Cover, FSC certified 250 GSM Matt Coated
Printing: Inside 4 colors CMYK recto/verso, Cover 4 colors recto/verso plus matt lamination recto only
Size: Closed A4 (Portrait) Open A3
Number of pages: Inside 60, cover 4.
Binding: Saddle stitched.
Wheelchair seat cushion: Pressure-redistribution cushion with deep/full offloading or immersion/envelopment features: Cushion with multiple sections without dedicated structural base.
INTENDED USE
For CHILD or ADULT wheelchair users who are at risk of, or have existing or previous pressure injuries, and who need good support to maintain stability and an aligned posture. Cushion and cover function to reduce heat and moisture generated when the user is sitting on the cushion.
Pressure-redistribution cushion with deep/full offloading or immersion/envelopment features: Cushion with multiple sections without dedicated structural base.
Helmet, ballistic resistant, protection level NIJ IIIA, large size (L).
....
Used for communal latrines, health centres, feeding centres, schools etc., it is composed of a double Superstructure with lockable doors, roof/cover and natural ventilation/aeration. The kit is easy to assemble to provide a stable and durable installation for a block of two (2) latrine stances/cubicles in emergencies.
Being supplied complete as a double cubicle, it has two adjacent latrine cabins per set, while the latrine slabs are supplied independently of this kit.
The kit shall be complete, ready to install, and not requiring any materials to be sourced in country for the initial installation. (However it is allowed to foresee the design for later repairs with local available materials).
The overall structures shall be of lightweight, rigid, durable and sturdy design, climatically stable and resistant to withstand heat, wind, dust, rain and manual cleaning, including stronger windy conditions.
-lab-186008188.jpg "RING SPANNERS (RECESSED PANEL CHROME VANADIUM)")
Drop forged from high quality Chrome Vanadium Steel, Carbon Steel
Anti Slip panel, firm grip even with oily hands.
Mirror Finish
....
