Complete with connecting cables and experiment manual. Photovoltaic Solar Energy Trainer is mounted on a mobile structure that allows it to be moved to the venue for practical sessions and allowing the photovoltaic panel to receive solar radiation.
Training Objectives:
The photovoltaic panel, which can be inclined through a range of 0 to 90, and the calibrated cell used to measure solar irradiation, are on one side, and all of the components of a basic photovoltaic facility used to provide 12 V of direct current and 230 V of alternating current are on the other side.
Identification of all components of the trainer and how they are associated with its operation
Measurement of the voltage and power parameters of the photovoltaic panel
Programming the load regulator
Analysis of the installation of the trainer
Measurement of solar irradiation
Alternating current supply
Direct current supply.
Combined Bending And Torsion uses specially machined necked specimens which are clamped at one end to the base plate and at the other end to a counterbalanced circular loading plate. Regular interval graduations on the loading plate allow a special hanger to locate. The object of this experiment is to determine what levels of Combined Bending And Torsion cause elastic failure in different materials, and to compare them with various theories of failure. The specimen deflection is measured by a dial gauge mounted diametrically opposite the load point. A set of calibrated weights is supplied along with a set of test specimens. Further test specimens are available separately. The special hanger enables pure bending, pure torque or a combination of both to be applied depending on the position of the hanger.
Experimental Capabilities:
To compare the results with the established theories of failure.
To determine elastic failure of a specimen subjected to several ratios of bending and torsion simultaneously.
Intended use:
Intended for molecular medical laboratory, PCR work. Micropipette tips for use with standard Micropipettes used for pipetting small amounts of liquid in the laboratory.
Primary receptacle: Leakproof box, with inserts providing barriers.
Secondary packing: plastic container, can hold 4 tubes up to 20ml. Approx. 40x150mm (diam x h), fitted with absorbent material.
Transport of Category-B infectious substance, with approved triple packaging
Compliant design for transportation.
Cold box, Large, Long range
Vaccine storage capacity: 20.25 litres
With hinged lid and carrying handles.
Cold life at 43°C without openings: 152 hours 28 minutes
Supplied with 44 x 0.4L icepacks as a standard.
Weight fully loaded: 49.70 Kg
Vaccine storage capacity: 80.5 L
Volume category: >/=60, <120 L
Energy consumption, stable running (kWh/24 hours): 1.16
Equipment operating voltage and frequency: 110-240 Volt 50Hz / 60Hz, 1ph.
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF- Grade A
Refrigerant: R600a, 60 grams
PQS Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Vaccine storage capacity: 120 L
Volume category: >/=120L
Autonomy time: Appliance’s autonomy at +43 ?C ambient: 82 hours 5 minutes
Refrigerant: R600a, 57 grams / Freezer: 47 grams
Operating temperature: +5 °C to +43°C
UIFPF: Grade A
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
The clock face has Braille dots underneath all the numbers (the numbers is raised) in order for children with visual impairment to touch the clock and read the numbers using the braille dots. Clock; teaching, wood or plastic, with desk-top stand. Diameter of clock 220 mm; wood material is 5mm and HDPE plastic material is 2 mm thick, easy-to-see numerals, large and small hands is screwed in to the wood or plastic.
....
Handheld, portable, battery powered pulse oximeter, continuously displaying patient oxygen saturation (SpO2) and pulse rate in real time using an external probe on the skin.
Display:
Display with main parameters: SpO2, pulse rate, plethysmographic waveform, signal quality, alarm messages, battery state indication.
Data update period for valid data displayed ≤ 15s.
Features:
Audible and visual alarms for low/high saturation and pulse rate.
Audible and visual alarms for sensor error or disconnected, system errors, low battery.
Suitable for cleaning and disinfection with hospital-grade cleaning products.
Alarm override and temporary silencing function.
Capable of working with adult, paediatric and neonatal reusable probes.
Enclosure protection IPX1 or better.
Device and probe weight < 200 g.
Measurement:
SpO2 and pulse rate monitor, with plethysmography waveform, for adults, children and neonates.
SpO2 resolution 1 %.
SpO2 accuracy (in the range 70 - 100%) within ± 3%, for all patients and perfusion / movement conditions.
SpO2 detection includes the range 70 - 100 %. Also capable of measuring lower saturations.
Pulse Rate detection includes the range 30 - 240 bpm.
Pulse Rate accuracy within ± 2 bpm or ± 2%.
Pulse Rate resolution 1 bpm.
For gripping and immobilisation of thick tissue (uterine traction forceps).
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0-15-0.20% carbon, 12-13% chromium.
Hard ratchet, lockable.
Pressure force instrument: gripping forceps, springy.
Uterine traction forceps, vulsellum / tenaculum, double curved.
Length: 28 cm.
Reusable.
Surgical gloves are sterile and strictly SINGLE USE. For surgical procedures or any sterile medical procedure to protect both patient and medical staff from cross-contamination.
....
Closed with a strong, single use clip, that once clicked in to position cannot be removed.
Personal information to be written directly on the bracelet with common ballpoint pen, non-erasable, or in the paper strip then inserted inside the transparent bracelet.
Single use, tamper proof, transparent, non-stretch personal identification bracelet for paediatric use.
Colour: Blue.
Strong and durable, soft to the touch. Atraumatic and hypo-allergenic.
Dimensions: approximately 1 cm x 25 cm (w x l). Length: adjustable at closure, the remaining free end of the strap may be trimmed adjacent its emergence from the clip.
Bucket made of HDPE (High Density Poly Ethylene), tough durable UV resistant and safe for food and water storage.
The walls should meet the bottom of the bucket with a curved inside surface to prevent dirt accumulation and facilitate cleaning.
The bucket capacity is 14 litres.
Height 33cm, top diameter 31cm.
The top is reinforced to prevent ovaling.
SIZE(MM) SIZE(INCH) NET WT.IN GMS. LENGTH(MM) NET WT. / CTN.(KGS) GR. WT.(KGS)
8 5/16 30 95 18 19.5
10 3/8 35 100 21 22.5
11 7/16 45 105 22.5 24
12 47 110 23.5 25
13 1/2 50 110 20 21.5
14 9/16 68 120 20.4 21.9
15 80 125 24 25.5
16 5/8 83 125 24.9 26.4
17 11/16 105 135 21 22.5
18 120 135 24 25.5
19 3/4 140 140 21 22.5
The diameter is 4-6mm, in the chemistry laboratory, the latex tube generally uses with the gas derivation, the different instrument connection and so on, but not suitable for the high temperature experiment, like distillation and so on.
....
It uses float bowl and array method to measure vital capacity, it can be used in demonstration experiment and grouping experiment.
....
Electric Anemorumbograph
....
Dimension (L*W*H CM): φ6*2
....
