The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. The trainer is mounted on a mobile stand constructed of 2 (5 cm) tubular steel equipped with four 5 (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). The Newer Ram Cummins Diesel Engine Bench With SCR trainer is a fully operational engine mounted on a mobile stand. The trainer is based on 2013 & newer Ram Truck w/Cummins 6.7L global engine platform. Students can perform many related Engine Trainer is equipped with safety guards covering all rotating components. Performance and Electrical/Electronic tasks using this trainer.
Educational Advantages:
Equipped with all OEM equipment related to EPA 2010 Emission Standards (with SCR)
Engine system responds to inserted faults with real world symptoms, OEM DTCs and check engine light operation
Demonstration of systems to groups of students without the access limitations of a complete vehicle
Features:
High pressure common rail fuel system (Bosch)
Integrated ECM breakout box with test points for oscilloscope and hookup
Breakout box terminals identified with OEM terminology and numbers
Diesel Particulate Filter (DPF)
Automatic transmission
Data link connecter for scan tool hookup
Exhaust Gas Recirculation (EGR)
Closed Crankcase Ventilation System
Diesel Oxidation Catalyist (DOC)
Selective Catalytic Reduction (SCR) w/ DEF injection.
It consists of two hollow leaded cylinder, scraper, and squeezing board controller. It is a demonstration instrument used to demonstrate attraction of solid molecular in middle school and secondary vocational school physics teaching, as well as it is used in students’ experiment and extracurricular experiment of school technology group.
....
Low particle counts
Boot covers provide anti-skid properties in wet and dry conditions. Two styles to choose from include seamless sonic welded or stress-resistant serged seams.
Available as seamless sole with sonic welded seams or elastic all around with serged seams.
Open impeller to observe the blades during operation
Continuously adjustable pump speed via frequency converter
Visualisation of cavitation in centrifugal pumps
Transparent pump housing and pipe at the inlet side
Display of the pressures at inlet and outlet side of the pump via manometers
Closed water circuit with tank and temperature display
Digital display of speed, water temperature in the return and flow rate
Temperature control via heater and external cooling via water supply
Flow measurement using rotameter.
A number of gauges and tools are included which resemble actual alignment equipment so that the student may make appropriate measurements and actually perform the real alignment process. Front Wheel Alignment Trainer has been specially designed to teach the principles of alignment in modern passenger cars. It features an original front of end of a vehicle which has been specially modified to facilitate instruction.
....
The trainer is built to help the student evolve from building basic circuits to more complex electrical troubleshooting. Due to the fact that the trainer is fully modular, additional can be added to follow technical evolutions in motorcycle and light vehicle industry. The Motorcycle Lighting And Accessory Systems Trainer contains OEM system components (application varies) mounted on modular plastic plates called where the student completes all of the system wiring. A built-in regulated and protected 12 power supply and fault box is included with the trainer for each side. The trainer is mounted single- or double-sided to allow more than one group of students to work simultaneously on the trainer.
Educational Advantages:
The trainer can provide multiple student work stations accessible from either side
Lighting and accessory systems respond to inserted faults (12) with real world symptoms
Students can build a complete motorcycle lighting or accessories circuit and simulate a switched-off immobilizer.
It is used to demonstrate working principle of rolling bearing and sliding bearing in junior middle school and high school physics demonstration and experiment. It consists of rolling bearing and sliding bearing.
....
Soft and breathable multilayer SMS material provides comfort in critical environments.
Ultra clean, low particle count.
Choose from elastic or knit wrist styles in blue or white colors.
Static dissipative
Soft, breathable and fluid repellent.
Investigate flow of compressible fluids
Transparent measuring objects with connectors for pressure measurement provide insight into the Internal structure
Pressure losses in subsonic flow in pipe elbows and various pipe sections
Measuring nozzle for determining the mass flow
Subsonic and transonic air flow
Variable speed on the radial fan for adjusting the mass flow
Record fan characteristic curve using a throttle valve
Digital displays for pressures, velocity and speed
Minimised turbulence by drawing in air and optimum arrangement of the measuring objects
Orifice for determining volumetric flow rate by differential pressure measurement
Pressure curve at subsonic and transonic nozzle flow.
Units are reconditioned so as all parts are fully operable and have been cleaned and painted. Many types of front end units are available and may be ordered with or without stands. These are complete original front end steering and suspension units which are intended for skill training exercises involving the maintenance and repair of automobile front end steering and suspension.
....
The Cummins 2013 Diesel Engine Bench w/EGR, DPF, SCR, is mounted on a tubing steel stand. Especially built to meet all diesel engine performance and repair tasks. Completely operational and safe, this standard trainer is easy to work on and complies with manufacturer rules and specifications related to all OEM codes, colors and electronics.
Educational Advantages:
Engine systems respond to inserted faults with real world symptoms, OEM DTCs and check engine light operation
Demonstration of major engine systems to groups of students without the access limitations of a complete vehicle.
This instrument is an adjustable DC stabilized source, with standard voltage: 1.5V-9V six grades, rated output current: 1.5A, voltage stability: each grade less than 350mV, current stability: each grade less than 350mA, ripple voltage: each grade less than 15mV, over-current protection, current limiting in the range of 1.8A~2.4A.
....
Hairnets are constructed of nylon and feature a honeycomb style.
Heavyweight hairnets
Available in a variety of sizes and colors.
Honey comb nylon
Choose from 18 in., 21 in., 24 in. diameter
Available in blue, black, brown, or white.
Measuring reaction or action force of the nozzle by deformation of the bending beam
5 nozzles with different contours (4 convergent-divergent, 1 convergent) and 1 baffle plate
Detect impact force or thrust at nozzle to determine the flow velocity and nozzle efficiency
Air intake adaptable according to the experiment layout
Distance between baffle plate and nozzle can be adjusted
Experiment layout A: measuring reaction force (thrust) of the fluid at the nozzle
Experiment layout B: measuring action force of the fluid at the baffle plate
Needle valve on the flow meter for adjusting the back pressure
Compressed air regulator for adjusting the pressure downstream of the nozzle.
An ampere meter provides an indication of the load and an in-line hydraulic pressure gauge monitors the hydraulic fluid circuit. Produces two types of Power Steering Trainers to demonstrate the principles and operation of power steering systems. In both trainers an electrical motor drives the hydraulic pump with belt drive. A resistance mechanism provides realistic operation and gives a load to the hydraulic circuit.
....
This model provides several forward speeds and reverses, consisting of a front section and an auxiliary section. The auxiliary section contains LO and HI range ratios, and the L and H splitter gear ratios. The Cutaway Eaton Transmission Trainer has been designed for teaching Eaton heavy-duty transmission theory and operation. When in HI range, the gear ratios can be split by using the splitter control button. This model is driven by hand crank.
Educational Advantages:
Allows visualization of gear changes and clutch operation
Gear changes can be made using regulated air pressure and provided controls
Driven by hand crank.
It consists of inlet pipe, inlet valve, exhaust pipe, exhaust valve, cylinder, piston, connecting rod, crankshaft, nozzle, oil needle, gear cam assembly, handle gear and tappet. It is used to explain basic principle of four-stroke single cylinder diesel engine and main construction of common single cylinder diesel engine.
....
Non-Woven 100% Spunbonded Heavy Weight Polypropylene
100% Latex Free
Safety Heavy-Duty Polypropylene Coverall is a latex free coverall that is made from high quality materials and comfortable to wear.
Low-Cost Solution for Dirt & Grime.
Aerodynamics experiments in the fields of flow around, incident flow and flow through models, as well As further experiments in the field of steady incompressible flow.
Thermometer for measuring air temperature
Vertical measuring section with flow straightener and nozzle
16 tube manometers for displaying pressures
Radial fan infinitely variable via frequency converter.
Accessories for the field of flow around bodies:
Boundary Layers
Visualisation of Streamlines
Drag Forces
Coanda Effect
Accessories for the field of steady incompressible flow
Flow in a pipe elbow
Bernoulli's principle
Free Jets
The chassis includes an integrated floor stand that is mounted on wheels for mobility. Hydraulic Brake Chassis Trainer is designed for student skills training in the operation, installation, maintenance and repair of hydraulic brake systems. A color schematic chart of the brake system and circuit is mounted onto the trainer for reference. The unit consists of original automotive components which are mounted into a simulated model auto chassis.
....
