The Cutaway 30/30 Air Brake Chamber is partly cut away so that a trainee can observe the internal elements housed within the chamber.
Educational Advantages:
Shows all internal components
Allows for some manual movement of actuator rod
Students can visualize actuator internal operation without the danger of sudden spring release.
Dimension (L*W*H CM): 30*13*40
....
Provides dual hazard protection with flame resistance and chemical protection. FR FR/CP Lab Coats are lightweight, breathable, and comfortable to wear. They employ IIIA fabric to prevent ignition and Shield CXP to repel small amounts of liquid chemicals.
Concealed snap front closure
Splash-resistant side pass-through for easy inner pocket access
Pockets include one double-stitched chest pocket and two large double-stitched lower front pockets with snap flaps
IIIA fabric prevents clothing ignition during short-duration thermal incidents and emergency exposure to flame
Shield CXP repels small amounts of liquid chemicals that are either dropped or splashed on the fabric
Black lay-down collar
Available in a variety of sizes
Includes a waistband in the back for a more tailored fit.
Kit cuffs are fire resistant but do not provide chemical protection - these are typically covered by gloves.
Pressure distribution around a cylinder subject to transverse incident flow
Cylinder with radial hole for pressure measurement
Determination of the pressure curve along the measuring section with up to 8 pressure measuring points
In conjunction with total pressure sensor measurement of the total pressure in the wake of a cylinder
Display and analysis of the measured values using the software
Rotatable cylinder for pressure measurement at any angle adjustment
Electronic detection of the angle
Scale for angle adjustment.
The Power Rack and Pinion Cutaway trainer is a cutaway of an actual power rack and pinion that shows internal components, allowing demonstration of internal components.
Features:
Hand Crank
Rotating Steering Gear
Late Model Recycled Power Rack and Pinion
Monted on a Diamond Plate and Powder Coated Metal Frame.
Can Bus Multiplex Trainer Upgrade Kit With Power Supply And Third Panel allows to convert the single-sided can bus multiplex trainer to a double-sided can bus multiplex trainer, or the single-sided heavy vehicle lighting system trainer to a single-sided heavy vehicle lighting system trainer and a single-sided can bus multiplex trainer using the same stand.
Main Features:
The trainer can also be used to explain the basics of CAN Bus for automotive applications.
Provides multiple student work stations accessible from either side.
Demonstrates CAN Bus functions including: wake up mode, lighting controls, engine brake lighting controls, ECM signals and cluster display.
Includes analog/digital inputs and outputs.
Includes a display that allows student to see system data changes in real time.
Includes two (2) CAN Bus modules that replicates heavy vehicle applications.
Includes one (1) rear lights panel and one (1) 12VDC power supply.
The system has a breakout box and data link connectors that allow students to install an oscilloscope to troubleshoot the signals.
Trainer contains twelve (12) faults integrated into the system that address common issues affecting typical CAN Bus applications.
Each module has a breakout box with test points that allows student to troubleshoot the systems.
It is mainly used for electromagnetics teaching in middle school.
....
Comfortable, pleated bouffant caps feature an encapsulated elastic headband to keep hair in place. Available in a variety of sizes and colors.
Disposable design for fresh, hygienic use every time.
Flexible, pleated design that stretches over the workers head
Polypropylene
100% Latex Free
Economical Protection
Sizes Available: 21, 24, 28 in
Vertically sliding Pitot tube can be set to 3 positions along the plate in the measuring section
Display of static and total pressure on the tube manometer
Additional measuring point for measuring the static pressure
Investigation of the boundary layer on a flat plate
Accessory for experimental plant
Plate leading edge with chamfer
Pitot tube for measuring the total pressure.
The Power Steering Pump Cutaway trainer is a cutaway of an actual power steering pump that shows internal components, allowing for demonstration of pulley operation.
Features:
Rotating Power Steering Pump Pulley
Mounted on a Laminate Base
Late Model Recycled Power Steering Pump
Hand Crank.
Terminal block receptacles are provided for diagnostic test points. The Four-Door Power Door Lock System Trainer allows for the demonstration of a complete power window system using real world components. The trainer is mounted on a plastic training board with the following features:
Electrical test points are included on the trainer for circuit diagnosis.
User manual included.
Must be connected to a fully charged automobile battery or a power supply.
OEM components (BCM, door latches, lock/unlock switches, ajar switches, etc.).
A lockable system fault box allowing instructors to insert from one to four faults for student diagnostic learning.
Dimension (L*W*H CM): 11.2*6*9.5
....
Durable, multi-use, low-cost isolation gowns provide economical protection.
Non-woven, spunbond polypropylene material is breathable, lightweight and low-lint.
Ideal for food manufacturing, light industrial, medical or anywhere a low-particulate barrier garment is needed.
Mildew- and flame-resistant
Latex-free and non-allergenic
One size fits all up to 3X-Large
Protect against dirt, grime and non-hazardous dry particulates
Rear entry and extra-long ties
Color: Yellow.
Determination of the pressure loss in the flow outlet into stationary surroundings
16 tube manometers for displaying the pressures is recommended
Pitot tube, can be moved horizontally and vertically
Accessory for aerodynamics trainer.
This circuit consists of a radial piston pressure pump, one delivery manifold, and an electro injector, all connected via high pressure hoses. Common Rail Diesel shows an accurate cross-section of the high pressure fuel system known as common rail.
Features:
Electro Injector
Hand Crank
High Pressure Hoses
Radial Piston Pressure Pump
Delivery Manifold
Mounted on a Laminate Base.
This unit is equipped with an integrated electronic fault box containing 12 faults. The Single Sided Can Bus Multiplex Trainer that communicates in protocol. Analog signals can be displayed using the display. Digital and analog inputs and outputs can be activated.
Educational Advantages:
Students connect modules and components using included jumper wires.
The Single Sided Can Bus Multiplex Trainer can be used as a CAN Bus demonstration trainer, or, using the included comprehensive student lab manual, as a CAN Bus training course.
The Single Sided Can Bus Multiplex Trainer uses communications protocol to operate a 4 module CAN Bus network, which includes both a DLC and a Deutch Connector.
Built in electronic fault box allows fault insertion into circuits for diagnostic training and student comprehension.
The trainer demonstrates common multiplexing circuit controls via a high speed CAN Bus network.
Main Features:
Trainer can also be used to instruct basics of CAN Bus automotive.
Each module has test points for individual diagnosis and testing
Includes digital and analog inputs/outputs
Single sided trainer with upgrade capacity for a double-sided configuration
Includes four (4) modules that replicate heavy vehicle applications including.
Jumper wire storage racks mounted to frame
Stand has two fixed and two lockable casters for easy trainer movement
Included user manual with theory explanations of CAN Bus, student exercises, schematics, sample scope patterns and check tests.
It is used to compare the magnetic strength of the magnet;
It is mainly used to demonstrate the direction of the the magnet and the pole interaction;
t is used to check if the wire has current and judge the direction of current.
Ideal for class 1000 environmental and above
Non linting
100% latex free and flame resistant
Individually inspected for stitching, sizing, material and workmanship
Commonly used in electronic, medical device and pharmaceutical industries.
Keystone SMS material is soft and durable, which makes it easy to work with. It offers excellence barrier protection while keeping the worker cool, comfortable and does not sacrifice mobility and comfort.
Pipe elements are commercially standard components in heating and sanitary engineering
Pipe sections can be selected via ball valves
Water connections made using quick-release couplings in the inflow and return
Flow can be adjusted via valves
Investigation of friction-induced pressure losses in flow through pipes
Clear panel mounted on a sturdy, movable frame
Differential pressure measurement via differential pressure meter with display
Four measuring sections with different pipe cross-sections and materials
Flow measurement using rotameter.
The Alternator Cutaway is a cutaway of an actual alternator that shows internal components, to demonstrate alternator operation.
Features:
Hand Crank
Rotating Alternator
Late Model Re manufactured General Motors Alternator
Mounted on a Laminate Base.
