Capacity: 214L
Cabinet Type: Upright
Volume Category: ≥ 80 <300L
Power requirement: 230V /50Hz and upon request 220V/60 Hz
Storage temperature: up to-86°C
Operating ambient temperature: +10 °C to +43°C (Hot zone)
Adjustable cabinet temperature set point -40°C to -86°C in 0.5°C increment., the temperature regulation accuracy is 0.1°C.
100 channels max
200 contact list entries max
Not ALE capable (see Envoy X2 for ALE option)
Not GPS capable (see Envoy X2 for GPS option)
No accessory connector.
The sheets to be hot-glued to the front-cover and cardboard backing. The pad should contain sheets of a minimum of 5 different strong colors.
Paper pad, 50 sheets A4-sized (297 x 210 mm) plain (un-ruled) colored sheets, hot-glued on the 210 mm side, with front-cover and cardboard backing.
Sheets to be of 75% recovered paper fibres (post and pre-consumer waste), 80 gsm with a cardboard backing sheet of approximately 600 gsm, and a front covering sheet of approximately 160 gsm.
Recycled paper
The composition of the paper should be homogenous with no
inclusions/alien particles and be suitable for a range of art activities # painting, coloring, sticking etc.
This is a new kit and has been designed for the early stages of an emergency when resources are limited. It is assumed that the kit is a starter-kit in the period before the larger, longer term supplies reach the required areas. The kit has been designed so that there are sufficient supplies for 40 children and 1 Teacher (that are easy to transport and distribute) to establish a learning space and to enable learning activities to commence.
School-in-a-Bag kit for 40 students and 1 teacher.
Decal, round, permanently adhesive, on square sheet.
Material: White gloss PVC, with permanent adhesive; 0.1mm thickness; lifespan 2-3 years from date of delivery; Kraft liner 130 grams.
Color: Background colour; cyan blue. The printed in white, positioned in the middle of the decal, running 80% of the diameter. Outside format: White background, with instructions printed in cyan blue lettering.
Size: Die-cut to diameter 205 mm, delivered in squares with instructions printed in cyan blue lettering on the white outside format.
Play Parachute is folded and packed in a storage bag made from the same material as the parachute, the carrying bag has a handle sewn on the side to enable it to be carried around and is sealed with a draw string. The 3.65 meter /12 feet play parachute with 12 handles, suitable for 6 children, is constructed from heavy-duty nylon.
....
Material: Knitted polyester, at least 110 gsm.
On one side of the flag there is a canvas heading with a rope sewn in (as reinforcement), connecting 2 loops for a flag pole.
Size: 150 x 225 cm.
Compartment 1:
Inside Pockets:
Two inner pockets; mesh sides with elastic tops, located on the back side of the main compartment.
Large compartment YKK zip closure around three sides of the compartment with a 2 way YKK zip pull. Mesh lining stitched to the base of the bag and a 1mm PVC board reinforcement secured on the base.
Size: H400 x Depth100 x W270 mm.
Compartment 2:
Small pocket H230 x Depth 40 x W280 mm with side gussets, zip closure around top of pocket with one zip pull.
It comprises a membrane at the listening head connected by a dual tube to the headgear with ear olives that are placed into the users’ ears. A mechanical listening device designed for listening to sounds from the heart, lungs, and/or gastrointestinal tract from adult and paediatric patients.
....
Full term newborn size manikin with soft, life-like skin and moulded hair. Transparent chest allows direct observation of ribs, heart and superior vena cava.
Facilitates training of following skills:
Central venous cannulation through cephalic and saphenous vein punctures.
Tube feeding and gastric suction.
Translucent skin allows visualization of underlying veins.
Correct anatomical position of basilic, cephalic, jugular and subclavian veins.
Round bowl.
Material: Polypropylene, autoclavable.
Capacity: approximately 6 - 8 litres.
Diameter: approximately 346mm.
Height: approximately 120mm.
In general, infusion pumps are used when the solution to be administered must be delivered with greater accuracy than can be provided through a manually adjusted gravity administration set. Infusion pumps are used to accurately deliver liquids through intravenous (IV) or epidural routes for therapeutic and/or diagnostic purposes. They are used in hospitals, in alternative care settings (e.g., homes, long-term care facilities, physicians' offices, outpatient infusion centres), and, occasionally, in emergency medical service vehicles. Volumetric single channel infusion pump, AC and battery powered including accessories.
....
Drum, sterilizer.
Air vents system to allow steam to circulate freely during the sterilisation cycle.
Lateral air vents system is preferable to top and bottom air vents.
Material: Austenitic stainless steel, smooth surface.
Closing lid with a clip lock.
Carrying handle.
Height: approx. 160 to 170 mm.
Thickness: approx. 0.6 to 0.7 mm.
External diameter: approx. 240 to 260 mm.
Austenitic stainless steel composition: approx. 8-10 % nickel, 18-20 % chromium.
Reusable.
For removal of retained products of conception from inside the uterus.
Material: Martensitic steel (quenched, magnetic steel).
Martensitic steel composition: 0.15 - 0.40 % carbon; 13 - 14 % chromium.
Uterine curette.
Blade edge type: Sharp.
Shank type: Rigid.
Blade shape: Oval, fenestrated.
Length: shaft approx. 26 cm.
Width: spoon 7 mm.
Reusable.
This set is sufficient for most examinations of complex wounds, appendectomy according to Mac Burney, non-complicated ruptures, etc. It is the best basic emergency surgical box.
This set should be considered part of any minimal investment in a health facility with surgical activities. A fully functional environment with theatre, sterilisation and resuscitation rooms, as well as trained personnel must be available.
High cutaneous tolerance.
Non-stretchable.
Able to be torn by hand.
Medical adhesive tape, perforated, roll.
Impermeable to water.
Material: Textile strip: woven acetate taffeta.
Adhesive: Mixture of rubber, resins and lanolin. Traditionally incorporates zinc oxide.
Must adhere strongly when applied to the skin, but can be removed without causing any significant lesion.
Colour: White or flesh coloured.
Components: Aerated and / or perforated textile strip impregnated with adhesive, with easily detachable protective polyethylene film.
Size selected: Medical adhesive tape, roll.
Length: 5m.
Width: 10cm.
Non-sterile
Single use.
It comes as powder packed in a canister to prepare a liquid therapeutic diet with an energy density of approximately 100 kcal/100ml. Therapeutic milk diet with added vegetable fat, carbohydrates, vitamins and minerals.
....
Education Kit Handbook Additional Guidance on Children with Disabilities. Early Childhood Development Education.
....
Digital programmable BTE (behind-the-ear) hearing aid for people with hearing loss. Designed to provide access to speech and aid in the perception of environmental sounds. This device is typically attached to the user’s ear through an earmold. Programmable behind-the-ear digital hearing aid. This electronic device amplifies and transmits sound for children with mild-to-severe hearing loss. It can be programmed to the user’s degree and type of hearing loss.
....
Soft Armour
Equipped with detachable collar, adjustable shoulders, deployable groin protector and rear extraction grab strap (for speedy evacuation of injured/ casualties), detachable comfort lining, for front and back. Pullover type with Velcro-fitted strap openings to enable maximum movement of the torso and multiple adjustments to ensure snug fitting. Fitted with front, rear, and side external pockets for insertion of hard ballistic plates.
Inner shell manufactured in suitable material for user comfort and hygiene, which also permits ease of laundering or other way to keep material in clean and hygienic state, includes clear plastic ID sleeve. Outer carrier comprising an outer shell utilizing a robust fabric appropriate for the operational requirements, back coated with polyurethane or similar material (for moisture and mildew resistance), and to include additional finishes for water repellency. Black webbing to attach accessories.
