The Concrete Water Impermeability Tester Three Points apparatus is supplied complete with graduated burettes fixed on the front panel. Concrete Water Impermeability Tester Three Points apparatus is used to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure. The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette. The unit accepts concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm. A manometer checks constantly the applied water pressure. A known water pressure is applied on the specimens surface for a known time, as requested by Standard, using a suitable air compressor having at least 5 bar pressure.
....
Surfacing capacity: 455/18 610/24 254/10
Max.planing width: 455/18 610/24 254/10
Thicknessing capacity: 200/8 200/8 177/7
Length of surface table: 1550/61 1550/61 1140/45
Rebating capacity: 12.5/1/2 12.5/1/2 12.5/1/2
Length of thickness table: 760/30 915/36 610/24
Min.length of workpiece for thicknessing: 254/10 254/10 254/10
Feeding speed (feed per minute): 24 24 24
Cutter block diameter: 120/4.72 120/4.72 95/3.75
Cutter block speed (rpm): 4000 4000 4000
Up/down movement of cir.saw table: 75/3 75/3 75/3
Max.circular saw diameter: 300/12 300/12 300/12
Power required - hp/rpm: 5/1440 5/1440 2/1440
The Panel View Operator Learning System is designed for higher processors and includes a Panel View 1000 operator terminal, mounting panel, cable set, in-depth curriculum for both theory and lab, and teachers assessment guide.
Panel View Operator Learning System adds to the PLC Troubleshooting Learning System to teach Human-to-Machine Interface (HMI) using Panel View Operator Station and model PLCs. Learners will study industry-relevant skills including how to operate, interface, and program Panel View operator terminals.
HMI operator stations have become commonplace in modern industry because they eliminate wiring, enable operator functions to be modified in software, and provide the ability for the operator to monitor PLC operations data.
Features:
Designed for higher processors
Reliable, industry standard components and features
Teaches Human-to-Machine Interface (HMI)
Includes a Panel View 1000 operator terminal, mounting panel, and cable set
World-class curriculum that integrates knowledge and skill-building.
This equipment consists of high power drills fitted with long drill rods to allow the boring of the hole in the model. An electric hand-drilling machine drives the drilling rod and that is supported on a slide which is arranged at a guide way. Self Propulsion Test Ship models have to be supplied with models manufactured with holes to pass the propeller shaft and stern tube assembly. The guide way for the drilling machine is attached to a vertical slide so that the position in height of the drilling rod can be adjusted. Cussons can supply equipment to drill the holes in the stern tube at the time of manufacture. At the end of the guide way the drilling rod is supported by a bushing. Furthermore the inclination of the guide way with the drilling rod can be adjusted at the vertical slide.
....
This Trainer Is Composed As Follows:
Work bench complete with:
4 wheels (the 2 front wheels are lockable)
3 drawers with locking systems with key for storing components.
50mm (horizontally and vertically) for quick clamping of hydraulic components without using additional tools.
1 clipboard located on the side of the work bench.
Metal working panel fully plastic coated; panel dimensions:950 x 1050 mm. With 5 mm holes every.
The structure of the course is based on the long-established training concept. This a fully equipped training system with all necessary components and aids to conduct a comprehensive training course in the fundamentals of pneumatic and electro-pneumatic controls.
Features:
2 large-format metal assembly panels for fast, secure component mounting
Sturdy base construction, mobile, with drawer system for storage
Complete training system providing an experimental introduction to the fundamentals of pneumatics and electro-pneumatics with PLC.
The workstation is constructed of heavy-duty, welded steel. Industrial quality components are mounted and plumbed in a closed loop circuit to control the water flow between two tanks or the liquid level in one tank. The Level And Flow Process Control Learning System teaches two of the most common types of process control systems, flow and liquid level, and the basic concepts on which other systems are based. All components are connected to banana jacks on the control panel to allow students to measure signals and connect the devices in a wide variety of control configurations. Students will learn to calibrate, adjust, install, operate, and connect process control systems in industrial applications. The process control simulator includes a bench-top workstation, process control network, control panel, student learning materials for both theory and lab, and teachers guide.
This allows students to study a wide range of process control methods. The relay control includes manual input switches, control relays, solenoid valves, and float switches to perform automatic on/off liquid level control. Level And Flow Process Control Learning System offers 3 types of controllers: relay control, the standard, and two options: PID controller and PLC control. Manual valves are used to switch between the PID and on/off control methods. The PID controller option enables variable electronic control of either liquid level or flow and the PLC controller option enables both on/off and PID control of the system.
Features:
Interchangeable Components
Built-In Instrumentation
Industrial Standard Components
Student Reference Guide
Heavy Duty Welded Steel Workstation
Industrial Safety Devices
3 Types of Controller Options
PLC Interface
Multimedia Curriculum Available.
This kit consists of suitable accessories for determining emission rate, color and ph level, software program manual and light source. Its application can be noticed in various teaching laboratories, earth science center and chemistry labs. Transmissions Experiments Kit is used for suitable measurement of different attributes of transmission lines and their input impedance. This multipurpose training system is used for providing thorough knowledge on phase delay, standing waves, attenuation and frequency response. This kit is suitable for explaining theories associated with color measurement based transmission, atomic emission and so on. We are a prominent manufacturer and exporter of Transmissions Experiments Kit.
Features:
Easy to understand mechanism
Simple to use
Meticulously designed.
Reciprocating engines consist of a piston reciprocating in a cylinder and connected to a crank shaft by a connecting rod. This cover includes a switch, which allows automatically stops the drive motor if the cover is opened. The Computer Controlled Balance of Reciprocating Masses Unit is mounted on an anodized aluminum structure with panels of painted steel. It includes rubber elements to have a vibration isolation and a transparent protective cover protects students from the moving crankshaft and allows the visibility of the practical exercises and elements of the unit.
....
The Plastics Technology 2 Learning System includes a clamping system, extrusion die for use with blow molding, pneumatic blow system, starter mold for blow molding, extrusion die, interactive curriculum for both theory and lab, and a teachers assessment guide.
Plastics Technology 2 Learning System adds to the Plastics Technology 1 Learning System to teach plastics blow molding and extrusion. Extrusion is used for two dimensional shapes like pipe, tubing, etc. and can be used in combination with blow molding. Blow molding is a popular method for processing plastics, consuming about 10% of all plastics worldwide, due to its economic cost and low finishing requirements. x
Students will learn skills such as creating a plastics part using a blow molding operation, troubleshooting blow molds, designing a blow mold using CAD/CAM, creating a blow mold using a CNC machine, creating a plastics part using an extrusion operation, and testing an extrusion for uniform diameter.
Features:
Extrusion Operation and Troubleshooting
Written and Multimedia Style Cirriculum
Blow Mold Development
Blow Mold Operation and Troubleshooting.
Inlet and outlet air pressures, temperatures and air flow rate, turbine torque and speed are recorded by a combination of instrumentation on the Compressible Flow Range base unit and the optional module.
Experimental Reaction Turbine Module:- Inlet and outlet air temperatures are recorded allowing the temperature drop due to work output to be measured. A single stage, radial flow , two jet reaction turbine with a throttle valve and belt brake dynamometer.
Experiments on the law of gravity on an inclined plane and on the angular acceleration of discs
2 rotating discs with self-centering conical pins
l x w x h 1200 x 300 x 280mm
Plane 1000mm, adjustable
Three spirit levels, three alignment bolts
The Heat Release apparatus measures time to ignition, mass loss and heat-release rate (option) of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter.
On the front panel, the following are mounted:
Load cell controller
Tare button
Temperature Controller
Control switches comprising four red on/off push-button switches, which operate by firm pressure and light up when activated:
Ignition switches on the spark-generator circuit housed in the test chamber base
Load cell switches on the Newport controller
Power switches on mains electricity to the unit
Cone switches on the Eurotherm controller. This, in turn, energises a solid state relay, which switches the power to the cone heater (5kW)
Features:
Special split shutter mechanism is designed to prevent heating of the sample before the test is started
Fire model manufactured from stainless steel for long life
Three control thermocouples for the cone heater to maintain accurate heat flux
Sample weight measurement is by a strain gauge load cell with quick electronic tare facility
Control unit contains switches for power, ignition, load cell and cone heater
Spark assembly is used in conjunction with the shutter mechanism. Microswitches are fitted to the spark arm and the shutter mechanism for safe operation
Load cell controller with a weight-ranging facility to improve performance to suit weight of sample 0-500g
Temperature controller for ramp and control of cone heater.
This module consists of a duct with transparent front andrear, between which is mounted a symmetrical aerofoil with a profile. The aerofoil may be accurately rotated to various angles of incidence (attack)to the air using the control and printed scale on the front of the duct. The aerofoil has 12 tapping points at various chord wise positions on its surface allowing the pressure to be measured at that point. The experiment mounts on the Air FlowBench contraction using toggle clamps. Each one of the tappings connects to themanometer (ancillary) via flexible tubes fitted with quick-release couplings. The tapping points are permanently connected to a manifold mounted on the duct showing the tappingposition and number for easy reference.
....
This kit contains a selection of resistance strain gauges,together with all the necessary accessories associated with their application. The adhesive included is acyanoacrylate single-agent pressure-sensitive type, and therefore the completeoperation of deciding where the gauge is to be placed to taking strain readingscan be completed in a few minutes. Each kit is supplied in a PVC carrying case. Also included are the appropriate cleaningagents, terminal strips and sundry items such as tissues, pressure sensitivetape etc. The quantities of the items in the kit areadequate for the installation of all the strain gauges. Primarily intended as a convenient form of generalpurpose kit, itwill prove particularly valuable to: (a) the non-specialist, who occasionally appliesstrain gauge techniques but has not acquired the experience to specify individual items with confidence; (b) the specialist who is required to performstrain analysis outside the laboratory at short notice; and (c) teaching staffin educational establishments required to demonstrate the technique and toconstruct experimental apparatus.
....
The Column Buckling equipment is used for studying strut buckling under load. Column Buckling is to be used with Universal Structural Frame or Universal Base Frame. A small lateral load is applied by means of a pulley and a weight hanger. A dial indicator measures the lateral deflection. The top frame has a loading screw which pushes a cylindrical strut support sliding in a bushing. Each strut has end conditions for knife edge or built in. The load reading is by an indicator. The bottom frame has a load cell and a cylindrical strut support in a socket.
....
This product includes a rod and a circular plate to show the principles and use of simple harmonic motion theory in bifilar and trifilar pendulums. Filar Pendulums fits to the sturdy Test Frame for study or demonstration. Two suspension plates fix to the top of the Test Frame to hold the bifilar and trifilar pendulums
This product is part of a range that explores free vibrations in simple one degree of freedom systems.
It introduces students to key scientific terms such as:
Radius of gyration
Parallel axis theorem
Axis of rotation
Simple harmonic motion (SHM) and period of oscillation
Mass moment of inertia.
Features:
Supplied with lecturer guide and student guide
Union directives
Refrigerator Unit Model consists of arefrigeration chamber with a heater as cooling load, evaporator, fan andvarious expansion elements. The fan supports the achievement of an eventemperature distribution in the chamber. Refrigerator Unit Model is part of the HSI trainingsystem for refrigeration and air conditioning technology. In combination withthe base unit HSI training system refrigeration and air conditioningtechnology, base unit the operational model of a domestic refrigerator iscreated. Solenoid valves enable the operation of the systemwith capillary tube or with expansion valve. All components are clearlyarranged on a panel. The model is plugged onto the base unit, secured using fasteners andconnected with refrigerant hoses to become a complete refrigeration circuit. The softwareoffers the option to simulate faults. Temperaturesand pressures in the system are recorded by sensors and displayed dynamicallyin the software. A cooling load can additionally besimulated with the heater. The operation of individual system components, here the temperature control, fan, heater, compressor and solenoid valves, takes place via the software. The effect of parameter changes can be tracked online in thelog p-h diagram.
....
Features:
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
As many as 20 layers of sensor linear compensation, elevates the precision of the instruments to the next level.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Integrated with software limit protection, hardware travel limit protection and full scale overload protection.
Support for multi-language user-interface extendibility.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
Support Excel report templates and customized editing of test reports.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
This product adopts a four-column structure as its main frame, featuring a stable, high-stiffness structure, as well as long-term stability, convenient operations, reliability and safety.
This product is integrated with a multi-channel coordinative digital load control system, enabling controlling methods including constant deformation speed, constant loading speed and etc., meanwhile switches smoothly in between. The system retrieves testing data automatically, and then processes the data under regulations and standards. The measuring and controlling unit is developed by our own engineers, integrated with the leading high-performance Controller, which is usually equipped on high-end material testing machines, and the pioneered modular Test Live computer testing software ensuring the reliability and precision of the system. It takes no human resources to read deformation data, requiring only one operator to perform the whole test. The test data of load, displacement and deformation are automatically retrieved, processed and stored meanwhile displaying real-time testing curves. Test reports can be printed under related standards. Assistance is required to install specimen or perform rotation tests. After years of application and refinement, our system features matured technologies, reliable operations and powerful functionalities.
