Controls Technology Double Sided A Frame Bench Upgrade system includes a hose rack, an A-frame assembly, a bench manifold assembly, a bench manifold assembly with valves, a bench manifold hose assembly, and an installation guide.
Controls Technology Double Sided A Frame Bench Upgrade
Controls Technology Double Sided A Frame Bench Upgrade allows for an additional Basic Hydraulics Learning System to be used for simultaneous hydraulic work on both sides of the bench. This system upgrades the Controls Technology Learning System Basic Hydraulics to the Double Sided A Frame Bench with Two Hydraulic Manifolds. The bench can also accommodate up to two additional hydraulic options or pneumatic panels.
The Electrical Fabrication Learning System includes a workstation, wiring components, storage case, hand tool package, electrical consumable package, electrical accessories, and student curriculum in print, instructors assessment guide, and installation guide. Electrical Fabrication Learning System teaches students skills that are commonly used by electricians, technicians, and engineers in todays industry. Installing, operating, repairing, or designing equipment for modern industry requires fundamental knowledge of electrical wiring and components. Optional interactive multimedia extends the learning opportunity as well as allows students to learn in the style they need. Students will gain expertise in key skill areas such as basic electrical system wiring, interpreting wire installation plans, handling non-metallic cable, installing basic components such as switches, outlets, and lighting, and connecting electrical services.
Features:
Safety Emphasized at All Levels
Optional Interactive Multimedia
Hands-On, Job-Ready Industry Skills
Student Reference Guide.
Touch screen control for ease of use
Units capable of up to 200 l/hr on special request
Process temperatures up to 150°C
Compact, mobile, easy to install
Continuous and batch operation
Standard throughputs from 30 to 100 l/h (dependent on conditions)
Automatic product divert with temperature on tubular heat exchanger
Built in clean in place (CIP) and sterilisation in place (SIP) facilities
Plate and tubular heat exchanger options
Controlled product preheat and heating temperatures
Simple and rapid switch over between heat exchangers
Capable of aseptic operation
Membrane control console
Fully instrumented
Preheating by hot water (indirect)
Heating by steam (indirect)
Integral USB data logging
Electronic flow meter option.
Two-stage cooling option.
The surfaces of the steel parts have a gunmetal finish to prevent corrosion. The safety catch model forms part of the extensive course providing an introduction to technical drawing. The approach involves teaching the systematic and transferable learning matter based on an operational mechanism. Comprehensive and well-structured instructional material supports wide-ranging use of the model in technical training. All parts, made from steel, are precision-manufactured on CNC machines.
....
The photovoltaic panels study unit is composed of basic panel mounted on a stand which allows any type of orientation, a movable electric equipment complete of voltmeter and ammeter, and a light source.
Characteristics:
The artificial radiation is possible because there is a light source constituted by lamp with brightness continuous change gear (0·300 W) mounted on an adjustable tripod. The electric instruments allow the photovoltaic panel performances control in the different conditions of solar and artificial radiation. The panel is constituted by 36 single-crystalline silicon cells, connected in series, and It presents the following characteristics with an ambience temperature of +25C:
Peak power voltage: 17 V
Amps max: 600 mA
Peak Watts: 10 W
Open-circuit voltage: 22 V
Required Services:
Electrical supply 220 V
Weights and dimensions:
Dimensions: 660x450x200 h mm.
Unit weight: 16 kg.
Functions:
Ratio in steering gear
Support of the steering forces by an electric motor
Sequence of movements in steering gear
Air Conditioner Installation And Maintenance Training Device can be used to train students to master the theoretical knowledge and practice skills of design, installation, commissioning and maintenance of air conditioning system.
....
Straight Edge 300 MM long galvanized steel, to level the concrete.
....
Composed of Kit For The Study Of Analogue Electronics
Sub module with power operational amplifier
Sub module with Schmitt trigger
Sub module with square triangular wave forms generator
Sub module with 1st order high pass low pass active filers
Sub module with 1st order high pass low pass passive filters
Sub module with 2nd order high pass low pass active filters
Sub module with class A and class AB push pull circuits
Sub module with operational amplifier.
The Geothermal Troubleshooting Learning System uses an exposed component layout so that learners can see each component's role in a geothermal system. Learners can easily observe, monitor, and test each component mounted and labeled on a vertical panel. Geothermal Troubleshooting Learning System is equipped with premier electronic fault insertion program for teaching troubleshooting skills. In addition to troubleshooting, the interactive multimedia curriculum and hands-on skills will teach startup, operation, shutdown, and maintenance of a geothermal system. Using, learners troubleshoot electrical, mechanical, and fluid-based faults to become effective real-world experts on residential and commercial geothermal systems. Also includes pressure and temperature gauges at key points to show the system's performance at a glance. Additionally, the system includes a custom designed, temperature-controlled ground simulator so the system can run continuously. Sight glasses installed in the Geothermal Troubleshooting Learning System allow the learner to see the refrigerant's changing state as it passes through the system.
Features:
Industry Standard System Components and Features
Ground Simulator Allows Continuous Training
Geothermal Troubleshooting with Desuperheater Learning System
Fault Pro: Electronic Fault Insertion Software.
The trainer is supplied with an exhaustive manual including a technical description of all the components operating and maintenance instructions and many exercises.
The unit Basic Pneumatics Trainer is the economic version of the Modular Pneumological Tutor.
The unit is made of painted steel plate and can be utilised on any support bench.
The unit requires an external pneumatic supply. A compressor is supplied as a optional.
The unit has been designed to study and experiment the fundamental pneumatics.
The unit is assembled in an anodized aluminum profile structure, with painted steel panel.
....
Suitable for Lab environments as well as Production from Low to Medium Test Volume
Automatic application, holding and removal of test loads
Selectable Dwell Times
Best combination of quality, accuracy and cost-effectiveness
Load Cell for Measurement of Test Forces
Accurate and fast
No need of handling heavy weights or cleaning the messy oils.
Load is applied to the truss by a screw jack mechanism with integral load cell. An extra diagonal member with its length adjustable by a simple mechanism is provided to make the first bay of the Redundant Truss. Each Redundant Truss member incorporates a strain gauge bridge arrangement for direct measurement of strain. The 45° two bay truss consists of seven members with pinned joints cantilevered from the vertical member of the Universal Frame and Stand using an upper springing and supported by a roller bearing on a vertical track at the lower springing.
....
The circular disc and axle are mounted with the axle vertical between pivots, one on the base and one on a radial brace from a vertical pillar. The apparatus consists essentially of a low inertia circular disc mounted onto a vertical axle that can be rotated under the action of a falling mass. The upper surface of the circular disc is scribed with circles of 100 mm, 150 mm, 200 mm and 250 mm diameter and two holes are provided on each circle as sites to locate additional inertia discs. The low inertia circular disc, which is 300 mm diameter and 50.8 mm thick, is manufactured from plywood and is keyed to a 12 mm diameter by 305 mm long stainless steel axle. A 50 mm diameter pulley is attached to the axle.
....
The demonstrates how energy can be saved by regulating compressor rpm and fault simulation switches allow students to diagnose.
A Domestic Air Conditioning Training Unit with Inverter for investigating the hydraulic, mechanical and thermodynamic operation of a split-type air conditioning system equipped with an inverter.
The has been designed and manufactured for safe operation in the laboratory environment and the refrigerant used is a which complies with current legislation.
Students investigate the refrigeration system, mechanical operation and thermodynamic cycles of a split-type air conditioning system with an inverter and understand how changes at different parts of the system affect efficiency.
This hands-on training program is designed to offer the student a thorough job orientation and skill development for the front-end servicing of vehicles. The Four Wheel Suspension Steering Brake Program system offers complete alignment concept flexibility. from basic front wheel alignment (on the trainer); to a complete four wheel alignment on passenger can.
....
The coil is immersed in an insulated tank containing hot water provided by either an electric resistance heater which is housed within the tank, or by the optional solar energy collector mounted in a suitable position outside. The Solar And Heat Source Vapour Turbine consists of a coiled copper tube through which pressurised solvent flows.
Experimental Capabilies:
Clear and easily observed demonstration of a classic Rankine Cycle. Production of Torque/Speed and Power/Speed curves for a single stage impulse turbine. Use of property charts or tables and the application of the First Law of Thermodynamics to produce energy balance. In addition, With Optional Solar Panel Demonstration of the production of shaft work from solar radiation. Determination of thermal efficiency at a range of turbine inlet and exhaust pressures. Comparison of performance with the Rankine Cycle Estimation of total frictional losses in turbines. Measurement of solar energy collection at a range of mean water temperatures.
Vaccine storage capacity: 1.7 litres
Vaccine carrier, Large, Long range
With lid and shoulder strap.
Cold life at +43°C without openings: 38 hours 37 minutes
Supplied with 4 x 0.4L icepacks as a standard.
Weight fully loaded: 3.34 Kg.
An electrically-powered device designed to deliver high-flow (exceeding peak inspiratory flow) heated and humidified ambient air or air/oxygen to a neonatal patient as part of noninvasive ventilation (NIV); it may additionally be used with a water tank to produce bubble continuous positive airway pressure (bubble CPAP).
Continuous Positive Airway Pressure (Bubble CPAP) system for the non-invasive respiratory support of normal, premature or low-birth weight neonate with spontaneous breathing. The unit has an integrated pulseoximeter to measure the level of arterial oxygen saturation in blood.
It consists of a gas flow generator that entrains room air, an oxygen input, a heating element, and humidification chamber; it does not include CPAP controlling pressure sensors (i.e., not a full CPAP unit). It is intended for use by a healthcare provider on a spontaneously breathing patient in hospital settings.
