Hot Plate With Magnetic Stirrer
....
The main element of the unit is a slotted, elastically deformable steel block. The resulting deformation is recorded by a mechanical dial gauge, and is directly related to the bolt tension force generated. By tightening the bolt joint, the slotted area is deformed, thereby generating an axial tension force in the bolt.
Features:
Breakaway torque of a bolt joint
Correlation between tightening torque and tension force on standardised bolts.
Learning Objectives And Experiments:
Measurement Of The Breakaway Torque, Including For Different Fitting Situations Of The Bolt Joint
Axial tension force in a bolt joint dependent on the tightening torque or the elastic deformation of a slotted block
Measurement of thread friction and overall friction.
Non Destructive Testing Equipments Visual Inspections
....
Digital Analytical Scales
....
Main Cable For Cableway System Galvanized Tow cable 10 mm
....
Probe Sonicator and Homogenizers
....
Industrial Temperature Meter
....
The Flow Boiling Demonstration Unit is a floor-mounted unit designed to provide a visual demonstration of the flow boiling processes that can occur inside the vapour generating tubes of practical plant such as refrigeration, steam, chemical and food processing systems.
....
The flume is made of transparent glass, precision-built toensure parallel walls and a consistently accurate cross section along itslength. The Viscosity and Particle Drag apparatus is a simplefalling-sphere viscometer. The self-standing unit holds two glass tubes filled with the test fluids, for comparisons and to minismise draining and refillingof the fluids after experimentation. A sturdy steel square-section firmly supports the channel throughoutits length. It has a floor-standing frame that supports the working section ata convenient eye-level position for students. The back plate has a low-voltage backlightso students can easily see the test spheres through the fluid. Students fillthe two tubes with their chosen test fluid, then select a sphere of the correctdensity and size for the fluid. They drop the sphere into the test fluid at thetop of the glass tube. The valve systemminimises the fluid loss from the tube and helps when draining the tube afterthe tests are complete. Students may also make their own use shapes to test inthe unit. The shapes must fi t through the valve at the base (maximum 8 mm inany single dimension). They then use a stopwatch (included) to measure the timetaken for the sphere to fall a set distance down the tube. When the test spherereaches the bottom of the tube, it enters a valve that the students turns,dropping the sphere into a collection vial for recovery. The apparatus can be used with any fluid that can besafely handled and is chemically compatible with the wetted parts of theequipment - glass and PTFE. Suitable test fluids include water, thin machine oil,castor oil and motor oil.
....
The water is output either from an outlet tank and flow measurement system located at the end of the main sand tank, from one or both of the two wells located in the tank, or one or both of the French drains. The unit comprises a sand tank, made of stainless steel, measuring 2 meters by 1 meter. A large plastic sump tank is located under the sand tank. Water may be input to the sand tank from spray nozzles located above the tank (simulating rainfall), from an inlet tank simulating a river flow or from two french drains buried in the sand at either end of the tank.
Capabilities:
Hydraulic gradients in ground water flow .Investigation of model stream flow in alluvial material
Determination of run-off hydrographs from model catchments including multiple storms, moving storms, effect of reservoir storage and land drains
Sediment transport, bed load motion, scour and erosion
Formation of river features and development over time
Construction of draw-down curves for one or two well systems in a sand bed.
Features:
Stilled inlet tank provides developed river flow conditions, allowing the full length of the tank to be used for river simulations
Control and measurement of inlet flows
Flexible configuration allows a wide range of simulations
Flexible configuration allows a wide range of simulations
Novel outlet tank design for water flow and sediment flow measurement
Stainless steel sand tank
Dual jacks provide adjustable tilt
Use of fine grade sand allows detailed feature development
Adjustable spray nozzle height
Computer data logging option for sediment and water outlet flow measurement.
Single grade of sand for all defined demonstrations, no need to change the sand.
The Portable Power and Control Electronics Learning System also utilizes the industry's premier computer-based fault insertion system, which enables learners to develop key industry troubleshooting skills, and features 30 different faults to present learners with realistic electronic circuit troubleshooting experiences. The Portable Power and Control Electronics Learning System features interchangeable application panels with industry-standard components that can be set up in a wide variety of real-world machine applications. These components will help learners develop hands-on competencies with linear power supplies, solid state relays, discrete and thermal sensing devices, solid state switching, and more.
Portable Power and Control Electronics Learning System covers how to operate, adjust, and troubleshoot electronic components, circuits, and systems used in machine applications. The Portable Power and Control Electronics Learning System provides skills and topics that will be invaluable in industries like manufacturing, transportation, energy, and construction. The portable learning system allows for on-the-go exploration of the fundamental concepts of industrial power and control electronics, such as measuring temperature, speed, and analog signals.
Features:
The portable learning system allows for on-the-go exploration of the fundamental concepts of industrial power and control electronics, such as measuring temperature, speed, and analog signals
Covers how to operate, adjust, and troubleshoot electronic components, circuits, and systems used in machine applications
Includes 30 unique faults that present realistic situations that technicians encounter on the job, such as troubleshooting a power supply, an open-loop operational amplifier circuit, a pressure sensing device, and more.
The gas compression apparatus consists of two commercial compressor receiver units each with added temperature indicators, flow indicator, power meter and pressure indicating controller. The compressors are of similar power demand but different design. Pressure, temperature and flow data obtained can be used to calculate compression efficiency. Control valves are provided to provide control of the downstream pressure.
Function of Compressor Trainer Single and Duplex Compressor
The gas compressors use air as the working fluid to demonstrate reciprocal compressor operation. Trainees select compressor type and flow rate then read and record the flows and temperatures for further analysis. The discharge pressure is automatically controlled to a selected process pressure set point.
Fruit juice and nectar preparation
Complete dosing and mixing line for nectar preparation from fruit puree. We can provide lines both completely automatic where fruit puree is dosed and mixed with different ingredients of the recipe (sugar syrup, water, additives) and semi automatic for small and medium size factories.
Fruit puree
Complete lines for fruit puree preparation from any kind of fruits with a capacity from 50 kg/h inlet product, both with complete continuous automatic equipments and also with batch type units for small capacity production.
Candied fruit preparation
Candied fruit is a product widely used in sweet and food preparation; the production requires a long and careful preparation. We design and manufacture lines for fruit candying both working under vacuum and at normal pressure.
Jam preparation line
Complete line for jam preparation; core of the line is the cooking system which can be under vacuum by using vacuum pan or at atmospheric pressure, with kettle working with steam or gas (even electrical for small production). Therefore, we can provide a wide range of equipment suitable to cover the needs both of industrial line and small/medium factories till the agricultural laboratories for organic preparation.
Dates and tropical fruits
Complete line for dates paste preparation as well as for processing and packaging fresh dates. Besides, we can supply complete lines for processing tropical fruits as mango, guava, passion fruit, pineapple in juice nectar and puree.
Drying lines for fruits
Static batch dryers suitable to process any kind of fruits. Therefore, we are able to supply complete drying lines as well as equipment for product preparation as washing units, cutting machines and distribution systems of the products on drying trays.
Common Rail Diesel Engine Management System demonstration panel shows the operating of the electronic, mechanic and hydraulic elements that constitute the control and fuel feed system of the contemporary CR/EDC ignition diesel engine.
The Common Rail Diesel Engine Management System is composed of two main modules:
The fuel system enables presentation of the sub-assemblies working and a change of the fuel dose. The pump drive control allows the simulation of the full rotational speed range from the start phase to full capacity. The fault simulation console enables creating of breaks in chosen circuits and observing the reaction of the control system to the occurred position. The measuring panel enables easy installation of the check meters for all the system sensors and working sub-assemblies.
Diesel Common Rail engine control unit, equipped with a microprocessor controller used for the demonstration of the high-pressure pump and electro-injector control system. The module can only work with the pump and injector control module.
Common rail pump and injector control system for demonstration of its working and for the study of the electric and hydraulic parameters of the high-pressure pump and electro-injector control system. The module can work autonomously or together with the Diesel Common Rail engine electronic control unit.
PLC Application is a compact teaching and practice unit for the control of a materials handling process using a PLC. Two processes can be simulated: a punching process, or workpiece control in the form of a sort operation. The working cylinder can switch between sorting and punching modes by a simple sequence of actions. All components are in a clearly laid out design. Black and white cylindrical workpieces are fed from a container onto a conveyor belt. On the belt is a reflex photoelectric proximity switch which differentiates between light and dark and feeds the white items to the pre-selected process (punching or sorting). The unit is designed for operation in conjunction with a PLC module. Use of PLC module is recommended. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
....
Plain bearings are commonly used in small to medium machine tools because they are simple to maintain and low cost. The Plain Bearing Machine Tool Axis Learning System adds to Mechanical Drives 1 Learning Systems to teach machine tool axis drives that use plain bearings. The model Plain Bearing Machine Tool Axis Learning System includes an operational dovetail slide with plain bearings and alignment adjustment devices; student learning materials for both theory and lab, and teachers guide. Students will learn industry-relevant skills related to this new topic including operation, installation, alignment, and troubleshooting. Plain Bearing Machine Tool Axis Learning System uses industrial quality components to help students become better prepared for what they will encounter on the job and to withstand frequent student use.
Features:
Industry-relevant skills
Teaches machine tool axis drives that use plain bearing.
Computerized Fixed Bed Plant For The Adsorption In The Gaseous Phase is supplied with an adsorption column filled with activated carbons, into which a stainless steel coil is immersed. Computerized Fixed Bed Plant For The Adsorption In The Gaseous Phase unit has been designed for the development of gas adsorption and deadsorption processes. The unit enables to check all the process characteristic parameters in such a way to realize work complete cycles. The unit is made of borosilicate glass as this latter is particularly suitable for its operating characteristics and also of stainless steel. The coil terminals can be connected to an external refrigeration or heating circuit according to the process to be realized. The computerized version unit allows, thanks to the electronic transducers and suitable software, to display on personal computer and/or print the tables of results and diagrams of the various experiments. The particular construction of the column allows the classic adsorption material (activated carbon) to be replaced with others such as silica gel, molecular sieves, activated alumina, or others for experiments concerning gas de-hydration.
....
The Vacuum And Recharge Station unit allows the assembling and disassembly of refrigeration and air conditioning plants and the filling and drainingoperations of the refrigerating fluid.
Vacuum and Recharge Station Composed of:
Portable recharge station with trolley-mounted frame, fitted with two-stage pump 120W for high vacuum, graduated charging cylinder
The two-stage pump used is fitted with a ballast valve and anti-air return valve
a.Flow rate: 3.6 m3/h
b.Cylinder capacity: 1.1 kg, capacity more than enough for filling of our educational equipment
c. Dimensions: 450 x 280 x 550 h mm
Ratchet wrench for refrigeration
Multigas electronic leak detector able to rapidly locate gas leaks.
Adjustable wrench max. Opening 30 mm
Cylinder connector.
Engaging the starter pinion can be demonstrated.
The function of the planetary gearing is easy to identify.
Parts cut in this model:
Armature can be rotated and solenoid switch actuated.
Solenoid switch
Housing and windings.
