The Audio System Trainer is mounted on a plastic training board with OEM components. It contains the following features:
A lockable system fault box allowing instructors to insert from one to four faults for student diagnostic learning.
Electrical test points allowing student circuit diagnosis.
Audio control unit.
Vehicle antenna.
Two speakers.
Educational Advantages:
Faults can be inserted into the circuit that create real-world symptoms and abnormal operation.
OEM components and color matching wiring are used.
Students must connect all components using included jumper wires to reinforce relationships between components and OEM wiring diagrams.
The ring gear (the outer most gear), 3 planet gears (green gears) that are housed by a carrier assembly (white color) and a sun gear (the yellow gear in the center of the gear set). The Planetary Gear Set Trainer is a simple planetary gear assembly that consists of 3 primary components. It allows 7 different operational modes.
Main Features:
Easy student visualization of planetary operation.
Seven operational modes can be demonstrated.
Sun, ring gear and carrier can be held, driven or allowed to react.
Optimal size for classroom.
Table top portability.
The trainer is capable of duplicating actual on-vehicle problems. The 3 Axle Air Brake trainer presents the real world operation and study of a 3 Axle Air Brake System. The program provides courseware for use by students and instructors.
Features:
Brake Light Switch
Low Pressure Warning Light and Buzzer
QR-1 Quick Release Valve
ST-3 Safety Valve
SC-1 Single Check Valve
E-6 Dual Brake Valve
R-12 Relay Valve
R-14 Relay Valve
PP-1 Control Valve
SR-1 Spring Brake Valve
DC-4 Double Check Valve
LP-3 Low Pressure Switch
Spring Brake
Drain Valve - Manual
Gauge
Service Brake Chamber.
This training unit also has the flexibility to allow instructors to create their own circuits and/or tests for measurement and evaluation. The Applied Electrical Trainer (AET) is a self-contained training device for the study of electricity and electrical circuits.
The Applied Electrical Trainer contains the following components and capabilities:
Power Supply with Dual Voltages (12V and 5V)
Auxiliary Jacks for an Additional Component
Toggle and Momentary Switches
Two Ground Connection Points
Eleven Loads Including Both Resistors and Lamps
Connector Wires in Three Colors
Circuit Breaker for Device Protection
A Compact Durable Enclosure
ON/OFF Switch with Indicator Light
Banana Jacks for Making Wire Connections
Courseware Includes Student Manual and Instructor Guide.
Starting System Trainer allows for instructor demonstration, student hands-on reinforcement and troubleshooting practice. The Starting System Trainer is part of an electrical system program which presents the live operation and study of starter motor systems. The Starting System is based on a CAN platform vehicle. Powered by a 12VDC automotive battery (not included).
Features:
Intermittent and hard fault codes can be inserted using the Instructor Management Program (IMP)
Computer connected to the trainer or over the Network System (ANS).
New vehicle components, connectors, and factory wire colors.
Provides an advanced level of instruction by duplicating actual on-vehicle troubleshooting procedures.
Compatible with Instructor Management Program (IMP).
Includes external power supply for fault activation.
Connects to a 12 VDC automotive battery (not included).
Courseware includes Instructor Guide, Student Manual, and Service Manual Information.
Hard faults can be inserted by using the built in keypad on the Starting System Trainer.
Ability to perform actual service manual test procedures.
Battery posts are protected against polarity reversal.
Keypad displays built-in scan tool data.
The Double Sided Brake Trainer is built with OEM components and is based on the non-ABS Toyota Yaris platform. The double sided two-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical hydraulic braking system as it operates on a real vehicle. This space saving double work station can be used in the classroom environment for demonstrations to students.
Educational Advantages:
All brake system components are accessible for complete mechanical and hydraulic repair and service
Space saving double work station
Demonstrates full functionality of a 2-wheel hydraulic brake system
Provides easy access to all brake components without the confinements of a vehicle
Provides two separate 2-wheel braking systems each with its own master cylinder and pedal.
Charging System allows for instructor demonstration, student hands-on reinforcement and troubleshooting practice. The Charging System is part of an electrical system program which presents the live operation and study of charging systems. The Charging System Trainer is based on a CAN platform vehicle. Powered by a 12VDC automotive battery (not included).
Features:
Provides an advanced level of instruction by duplicating on-vehicle troubleshooting procedures.
Intermittent and hard faults can be inserted using the Instructor Management Program (IMP) via a computer connected to the trainer
Hard faults can be inserted by using the built in keypad on the Charging System.
New vehicle components, connectors, and factory wire colors.
Battery posts are protected against polarity reversal.
Includes external power supply for fault activation.
Compatible with Instructor management Program (IMP).
Ability to perform service manual test procedures.
Connects to and charges a 12VDC automotive battery.
Courseware includes Instructor Guide, Student Manual, and Service Manual Information.
User interface displays built in scan tool data.
Wiper Washer System Trainer allows for instructor demonstration, student hands-on reinforcement and troubleshooting practice. The Wiper Washer System Trainer is part of an electrical system program which presents the live operation and study of wiper washer systems. Powered by a 12VDC automotive battery or a 12VDC/23A power supply (not included).
Features:
Provides an advanced level of instruction by duplicating actual on-vehicle troubleshooting procedures.
Hard faults can be inserted by using the built in keypad on the Wiper/Washer System Trainer.
Ability to perform actual service manual test procedures.
Intermittent and hard faults can be inserted using the Instructor New vehicle components, connectors, and factory wire colors.
Management Program (IMP) via a computer connected to the trainer.
Battery posts are protected against polarity reversal.
Includes external power supply for uninterrupted fault operation.
Courseware includes Instructor Guide, Student Manual, and Service Manual Information.
Compatible with Instructor Management Program.
User interface displays built in scan tool data.
The trainer provides a safe and effective method of demonstrating the principles of hydraulic braking systems used on todays vehicles. The Two Wheel Hydraulic Brake Trainer is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle. The trainer can be used in the classroom environment for demonstrations to students. The trainer is built with OEM components and is based on the Kia Rio platform.
Advantages:
Provides easy access to all brake components without the confinements of a real vehicle
Demonstrates full functionality of a 2-wheel hydraulic brake system
Pressure gauges show actual braking pressure at each wheel.
Provided in locking suitcase for security and portability
Fault insertion selection by circuit number, Experiment 3-2
Fault insertion selection by module
Local and Network fault insertion
Network display and storage of students performance
Instructor can develop circuits and faults at component level
Includes components for all three stages and original GM faulted components
Compatible with Network System and IMP.
The trainer can be used in the classroom environment for demonstrations to students. The instructor can manually select which wheel combinations are desired to lockup prior to application of brake pedal. The Four Wheel ABS And Traction Control Trainer is used to demonstrate the functionality of the ABS braking system with traction control as it operates on a real vehicle. The trainer provides a safe and effective method of demonstrating the principles of braking systems with traction control used on today’s vehicles. Manual selection of different road conditions (ice, wet and dry) is available.
Educational Advantages:
Trainer matches all OEM wiring schematics & wire colors
Students can observe engine system reactions to traction control events
Demonstrates full functionality of a 4-wheel ABS system with traction control
Allows choice of ABS “application” timing for clearer demo’s
Six system faults selectable by the instructor
Instructors can choose different wheel location combinations
Instructor can choose from ice, wet or dry road conditions.
Features:
Digital instrumentation indicating fuel injector pulse and spark control
Real automotive components with fully functional ABS 4-channel hydraulic system with full traction control
Equipped with DLC for scan tool hookup and data stream viewing
OEM vehicle instrument panel with indicator lamps
Fits through a standard 30” door opening
Bar graph displays on front panel showing brake pressure at each wheel
Hydraulic pressure gauges
Functioning ignition system.
This Trainer supports all Courseboards to provide students with hands-on experience. Automotive Electricity and Electronic Program is supported by the Troubleshooting Trainer.
Features:
Internal 12 Volt DC Power Supply
The Trainer plugs into any standard electrical outlet. The Power Supply is protected from dead shorts or other over current concerns. The power supply also includes a master on/off switch, POS and NEG Terminal Posts and Fused Protection.
Simplified Digital Multimeter
The Multimeter includes a fuse to protect against incorrect hook-up. The On-Trainer Digital Multimeter is scaled to simplified current, voltage, and resistance measurements and calculations thoughtout the Automotive Electricity Program.
Carry Storage Case
The Workstation includes a convenient storage case constructed of durable plastic. Foam cut-outs accommodate the Workstation, up to four courseboards, meter leads, and other assorted supplies.
The SRS Air Bag Trainer allows students to understand the fundamentals of air bag systems as used in todays vehicles. Using the trainer, students will learn to recognize the main components, study various operation settings, and experiment with analytic and diagnostic methods using a diagnostic scan tool. Built with OEM components, the trainer functions in the same way as in the original vehicle with the difference that a light is used instead of the exploding airbag. A built-in lockable manual fault box is included.
Educational Advantages:
Ability to demonstrate complete SRS (Supplemental Restraint System) function in a classroom
Steering wheel can be safely removed and reinstalled during diagnosis or system testing
Full OEM diagnostic functionality supporting OBDII scan tool readout with OEM DTCs
Instrumentation demonstrating air bag deployment.
Equipment And Features:
Integrated SRS breakout box with test points for all terminals sized for standard meter leads
All OEM components, wiring, connectors and wire colors
OBDII data link connector
Manual fault box for SRS control module with 10 faults.
The Timing System Belt Trainer visually identifies all of the components in a typical belt type camshaft drive system for OHC engines.
Advantages:
Allows full access of all OHC drive belt components without limitations of vehicle components, covers and shrouds blocking view
Students are able to have clear access to all components for skill practice prior to working on a complete vehicle.
Can be used for clear demonstrations of common service inspections and repair procedures of:
a. Drive belt
b. Cam and Crank oil seals
c. Cam and Crank gears
d. Hydraulic belt tensioner
e. Water pump drive gear
f. Idler puller
g. Tensioner pulley.
This configuration is very common in modern vehicle belt drive applications. The Serpentine System Belt Trainer is a visual representation of an accessory drive system using both sides of the drive belt to transmit torque.
Advantages:
Allows student practice for replacement and normal service procedures of:
a. Tensioner
b. Drive belt
c. Idler pulley
Provides accessibility for teaching the proper methods of belt and tensioner condition inspection without limitations of having a complete vehicle with shrouds, components and covers blocking access.
An industry standard belt wear gauge is included.
The trainer uses the H-Block TXV design of refrigerant flow control. The trainer uses common automotive components and can be used in both classroom and shop environments. The Air Conditioning System Trainer H Block is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer utilizes a hermetically sealed and internally protected compressor. Operates on 120V 15A 60Hz circuit.
Advantages:
Fully operational with typical component layout and organization.
Clear sight glasses provide clear understanding of the H-Block (TXV) air conditioning refrigeration cycle.
Trainer has all major components required for an automotive air conditioning system using the H-Block TXV system.
Trainer can be connected to any A/C Recycling/Recovery equipment using R134a service ports.
Allows student observation of refrigerant changes of state (liquid/vapor) at the receiver/drier, evaporator and condenser.
Features:
High pressure (300psi) safety switch shuts off compressor.
Cycling switch bypass toggle switch.
Internally protected hermetically sealed A/C compressor.
A/C compressor has manual starter with internal thermal protection.
Stainless steel condensate drip pan with drain.
Adjustable 3-speed evaporator (1) and condenser (2) fans.
The Four Wheel ABS Trainer can be used in the classroom environment for demonstrations to students. The instructor can manually select which wheel combinations are desired to lockup prior to application of brake pedal. The Four Wheel ABS Trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. The Four Wheel ABS Trainer provides a safe and effective method of demonstrating the principles of braking systems used on todays vehicles. The Four Wheel ABS Trainer is built with OEM components and is based on the 2006-2010 Civic platform.
Advantages:
Demonstrates full functionality of a 4-wheel ABS system
Allows choice of ABS application timing for clearer demonstrations
Allows choice of wheel combinations to lock-up during ABS operation
Trainer follows OEM wiring schematics
Six system faults that are selected by the instructor
Trainer can be used for full mechanical service and repair operations of:
a. Front disc brakes
b. ABS Electrical System (w/ wheel speed sensors)
c. Parking Brake system
d. Rear drum brakes
e. ABS Hydraulic Control unit
f. Master Cylinder & Hydraulic system (w/ pedal).
Provides real world brake pedal feedback pulsations during ABS operation.
Trainer can fit through a standard 30 door opening.
Features:
Real automotive components with fully functional ABS 4-channel hydraulic system
Hydraulic pressure gauges at each wheel (4)
Fault insertion box (lockable) 6 faults
Equipped with DLC for scan tool data stream hookup
OEM vehicle instrument panel with indicator lamps
Heavy Duty metal stand with casters for easy transport of trainer
Four (4) hubs equipped with brakes (2 discs and 2 drums).
Key areas of the starter have been cutaway to allow visual observation of major components while still being functional. The Cutaway Starting System Trainer allows for the demonstration of a complete starting system using real-world components. Requires a 12V battery or jump box to operate.
Advantages:
Fully functional cutaway starter
Demonstrates starter planetary gear reduction
Ability to test and verify a basic starting circuit
Allows students to view all internal starter components during live starter operation
Starter is enclosed in plexiglass to ensure student safety
The starter solenoid can also be bridged with a remote starter switch (not included) using the solenoid primary terminals
Four operational faults can be inserted to promote student diagnostic troubleshooting competencies.
Features:
Clutch pedal safety switch
Crank relay
Electrical test points for crank relay
Ford Modular solenoid (cutaway)
Ford Modular starter (cutaway)
Ignition switch
Electrical test points for testing and diagnosis
Lockable fault box with four manually selected operational faults.
The trainer uses the TXV (Thermal Expansion Valve) design of refrigerant flow control. The trainer uses common automotive components and can be used in both classroom and shop environments. The Air Conditioning System Trainer Thermal Expansion Valve is a complete A/C system with unique features designed to enhance the instruction of air conditioning physics. The trainer utilizes a hermetically sealed and internally protected compressor. Operates on 120V 15A 60Hz circuit.
Features:
Digital thermometers (4) at inlet and outlet of evaporator and condenser.
Two rows of LEDs that help in viewing refrigerant flow in condenser and evaporator which allow for clearer viewing of refrigerant flow.
OEM R134a service ports.
High and Low side A/C pressure gauges.
Adjustable temperature control switch for evaporator temperature levels.
Stainless steel condensate drip pan with drain.
Removable magnetic component name labels and refrigerant flow direction arrows.
Internally protected hermetically sealed A/C compressor.
A/C compressor has manual starter with internal thermal protection.
Cycling switch bypass toggle switch.
Operation and Student assignment manual included.
The trainer can be used in the classroom environment for demonstrations to students.The trainer provides a safe and effective method of demonstrating the principles of hydraulic braking systems used on todays vehicles. The Four Wheel Hydraulic Brake Trainer Honda four-wheel hydraulic brake system trainer is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle.
Advantages:
Provides easy access to all brake components without the confinements of a real vehicle
Demonstrates full functionality of a 4-wheel hydraulic brake system
Pressure gauges show actual braking pressure at each wheel
Features:
Real automotive components with fully functional disc/drum hydraulic braking system including:
Heavy duty metal stand with casters for easy transport (two fixed and two swivel w/locks)
Hydraulic pressure gauges at each wheel
Fully functional parking brake system
Fits through a standard 30 door opening
All routine brake service procedures can be performed on this trainer including:
Disc/Drum service
Wheel bearing service
Master cylinder service
Brake hose/line service
Brake pad/shoe replacement
Caliper/Wheel cylinder service.
