Capability of mechanics testing on various metal materials. e.g. Metal tension, compression, bend, shear, etc.
Capability of mechanics testing on various nonmetal materials. e.g. Wire tension, plastic bending, cable peeling, etc.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing assignment.
Support for multi-language user-interface extendibility, pre-installed.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Support for displaying a single curve of a specimen or the overlay of multiple curves.
Features:
Capable of communications with a computer, enabling computer software controlled operations.
Specially designed control panel, beautiful and easy-to-use.
160,000-color true-color touch screen for display and operate, featuring a beautiful and user-friendly interface.
Impact energy displayed intuitively on the LED screen in a large font size.
Software logic protection on installing, latching, unlocking and releasing, eliminating operation mistakes.
Integrated with a large storage for testing data recording and saving.
Support for automatic/manual printing.
Almost all the new generation commercial and military aircraft utilize electronic displays in the cockpit. Training imparted on an ARINC 429 based EFIS will prepare the students to easily understand other EFIS based on other versions of commercial and military avionics data busses. EFIS Trainer has been designed to enable avionics students to understand a typical digital bus EFIS system, and to perform maintenance and troubleshooting tasks that are typically encountered by avionics maintenance personnel. Electronic Flight Instrument System is the essential component of Glass Cockpit. he most widely used avionics data interface standards. It has been installed on many commercial passenger and transport aircraft including Airbus A310/A320 and A330/A340, Bell Helicopters, Boeing727, 737, 747, 757, 767. The fault panel allows for the simulation of typical aircraft EFISi nstallation faults including sensor feed faults. The faults are easy to select but not apparent to the student. A numbered switch panel or patching panel with cover is provided. The EFIS Trainer is based on Two Display Units, a Symbol Generator, a Control Unit, a Signal Simulator, and an Instructors Panel. Electronic displays are multi mode with ADI, HIS and Map modes. Map mode allows for superposition of Weather Radar data and sector display. Wiring harnesses in the trainer are representative of aircraft standards in hardware and wiring / looming techniques. Interconnect diagrams and panel circuit and layout diagrams are also provided.
....
Electrical Machine Trainer
....
Electronic Injector Pump
....
The structure of the course is based on the long-established training concept. This a fully equipped training system with all necessary components and aids to conduct a comprehensive training course in the fundamentals of pneumatic and electro-pneumatic controls.
Features:
2 large-format metal assembly panels for fast, secure component mounting
Sturdy base construction, mobile, with drawer system for storage
Complete training system providing an experimental introduction to the fundamentals of pneumatics and electro-pneumatics with PLC.
Features:
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
As many as 20 layers of sensor linear compensation, elevates the precision of the instruments to the next level.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Integrated with software limit protection, hardware travel limit protection and full scale overload protection.
Support for multi-language user-interface extendibility.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
Support Excel report templates and customized editing of test reports.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
This product adopts a four-column structure as its main frame, featuring a stable, high-stiffness structure, as well as long-term stability, convenient operations, reliability and safety.
This product is integrated with a multi-channel coordinative digital load control system, enabling controlling methods including constant deformation speed, constant loading speed and etc., meanwhile switches smoothly in between. The system retrieves testing data automatically, and then processes the data under regulations and standards. The measuring and controlling unit is developed by our own engineers, integrated with the leading high-performance Controller, which is usually equipped on high-end material testing machines, and the pioneered modular Test Live computer testing software ensuring the reliability and precision of the system. It takes no human resources to read deformation data, requiring only one operator to perform the whole test. The test data of load, displacement and deformation are automatically retrieved, processed and stored meanwhile displaying real-time testing curves. Test reports can be printed under related standards. Assistance is required to install specimen or perform rotation tests. After years of application and refinement, our system features matured technologies, reliable operations and powerful functionalities.
Complies with standard requirements of torsion and compression, as well as a variety of destructive, non-destructive and multi-cycle tests.
Domestically pioneered highly efficient three-level operation model of testing data processing. Supports open testing data processing, appending custom testing data items, testing standards and auto-processing of testing data.
Automatically performs the whole test with user-defined testing procedures.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
Support for displaying a single curve of a specimen or the overlay of multiple curves.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Characteristic testing data can be marked on testing graphs.
Support saving, instant retrieving and inspection of testing results.
Support Excel report templates and customized editing of test reports.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
Features:
Integrated with a large storage for testing data recording and saving.
Support for automatic/manual printing.
Specially designed control panel, beautiful and easy-to-use.
Impact energy displayed intuitively on the LED screen in a large font size.
Capable of communications with a computer, enabling computer software controlled operations.
160,000-color true-color touch screen for display and operate, featuring a beautiful and user-friendly interface.
Controlled by a fast and accurate unit.
Software logic protection on installing, latching, unlocking and releasing, eliminating operation mistakes.
Features:
Automatic stop when reaches target rotation turns or specimen breaks.
Distance between grip jaw continuously adjustable by moving the ball screw.
Stably and reliably controlled through human interface and PLC.
Stainless table makes it easier to clean.
TFT true-color LED screen to display current rotation, target rotation turn and configured speed.
No stepping in speed adjustment. Automatic data recording. Rotation speed and turns configurable.
Equipped with translucent safety shield to prevent specimen from popping out when it breaks.
More reliable hydraulic gripping means for wires in large diameter.
Features a large test space that satisfies both GB requirements (longer than 60 times the specimens diameter), as well as American and European requirements (not less than 2.4 meters).
Real-time drawing of curves of remaining load with time, or temperature with time.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
The measurement and control system is capable of backing up the transducers calibration data, improving the systems maintenance reliability.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Integrated with travel limit protection and full scale overload protection.
Open testing report, support custom testing template, automatic generation of testing report, which can be printed, previewed or saved as files.
Support Excel report templates and customized editing of test reports.
Algorithm to predict specimens stress relaxation performance after 1000 hours (or any specified value in hours), with the option of single or double logarithm. Capable of predicting with standard specimen data or real-time collected data (Suggested). Integrated with an extensive specimen library to improve the precision and reliability of testing results.
The Electric Torque Wrench Learning System includes an electric torque wrench, a 19mm box head drive, CD-ROM based student learning materials for both theory and lab, and teachers assessment guide. The CD-ROM based curriculum includes virtual simulation of key skills, allowing learners to practice skills in advance of actually working on the equipment.
Electric Torque Wrench Learning System uses industrial quality components to help assure that students are better prepared for what they will encounter on the job and to withstand frequent student use. The CD-ROM based curriculum can be accessed locally or web delivered, allowing businesses to increase delivery of high quality assembly practices in far flung organizations.
Electric Torque Wrench Learning System teaches the operation and application of electric torque wrenches with threaded fasteners. The Electric Torque Wrench Learning System teaches learners how to use a high-speed, precise torque tool. Precision assembly requires accurate fastener tension in bolted assemblies.
Features:
Industrial quality components
Hands-on skills
Teaches learners how to use a high-speed, precise torque tool.
Copper Electrochemical Test Device
....
The Steam Electrical Generator Trainer uses a natural gas boiler to generate steam which is then expanded in a steam turbine, converting the heat energy of the steam into electrical energy via the turbo-generator. Steam Electrical Generator Trainer demonstrates the conversion of stored chemical energy to electricity the primary method of generating electricity used today. The Steam Power generation Thermodynamics Trainer is purpose designed and built for hands-on education and training on topics related to steam generation, power generation and control.
Steam Electrical Generator Trainer is a real system that generates electricity from a natural gas fuel on a small scale. Steam Electrical Generator Trainer is mounted complete on a single skid allowing for compact installation. Industrial type process components, process measurement and control devices have been used throughout the trainer to provide the student with a realistic training experience using equipment common to industry. In every other respect the system is designed, operated, controlled, and maintained in the same way as the full-scale industrial electrical generating facilities.
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Capability of mechanics testing on various metal materials. e.g. Metal tension, compression, bend, shear, etc.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing control procedures and a wide range of instruction types. Also supports dynamic instruction parameter assignment.
Support for displaying a single curve of a specimen or the overlay of multiple curves.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Characteristic testing data can be marked on testing graphs.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Domestically pioneered highly efficient three-level operation model of testing data processing. Supports open testing data processing, appending custom testing data items and re-inspection of processed testing data.
Features:
Dynamic display of load, displacement, time and real-time testing curve on the screen.
Closed loop control of channels such as load, displacement, etc. Smooth switching in between.
Servo-controlled loading. Controllable pre stress. Load is applied to specimen uniformly.
Support for holding at constant load or constant displacement.
Software online notification of current working status and operating procedures.
Capable of loading at constant speeds of various levels.
Capable of automatic loading or holding by loading program settings.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing control procedures and a wide range of instruction types. Also supports dynamic instruction parameter assignment.
Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Components:
DC Power Switch with indicator light
Master Power Switch with indicator light
Solder-tail aircraft connector
Audio alarm
Circuit Breakers
DC power buss
Relays
Switches
Terminal strips
Voltmeter
Ammeter
Indicator lamps
Power Requirement: 110V AC or 220V AC
Dimensions: 18 L x 18 W x 10 H inches.
Electrical Drive Trainer
....
Electrical Tool Box Complete
....
