Capacity: 3/8, 1 1/2 to 2 1/2 to 3
Pressure: 10 Ton 15 Ton 15 Ton
Former Size: 3/8, 1/2, 1/2, 3/4, 1/2, 3/4
3/4, & 1 1, 1.1/4, T,1.1/4,
1.1/2, & 2 11.1/2, & 2
2.1/2, & 3
Methane Handheld Laser Analyser
....
Features:
Compact High Quality Engineering.
Ensure Minimum Maintenance, Together With Simple and SafeOperation.
A Fully Welded Structure.
With Foot Control.
It Is Easy For Operation And Relax Hands.
Hand Operated:
Capacity in Tones Throat Day-Light Stroke
5 115 210 75
15 150 225 100
25 200 300 125
40 250 350 140
60 300 400 150
75 325 450 150
100 350 500 150
150 375 550 150
Handheld, portable, rechargeable battery powered pulse oximeter, for the noninvasive spot-checking or continuous monitoring of patient oxygen saturation (SpO2), pulse rate and respiratory rate.
Pulse Rate detection range: 25 - 240 bpm.
Pulse Rate resolution: 1 bpm.
Pulse Rate accuracy: within ± 3 bpm (no motion, low perfusion), ± 5 bpm (motion) for all patients (infants, children, adults).
Respiratory rate range: 4 to 70 rpm
Respiratory rate resolution: 1 rpm
Respiratory rate accuracy (no motion, adults/paediatrics (> 2 years)): within ± 3 rpm A(RMS), ± 1 rpm mean error
(Note: device is indicated for spot-checking or continuous monitoring of Respiration Rate from the photoplethysmogram (RRp) of adult and pediatric patients (> 2 years) during no motion conditions).
Measurement:
SpO2 and pulse rate monitor, with plethysmography waveform, for infants, children and adults.
SpO2 detection includes the range: 70 - 100 %.
SpO2 resolution: 1 %.
SpO2 accuracy (in the range at least 70 - 100%): ± 2% (no motion, low perfusion), ± 3% (motion) for all patients (infants, children, adults).
Display:
Data display refresh rate: every 1 s
Display with main parameters: %SpO2, pulse rate, respiratory rate, signal quality, status messages, battery state indication.
Casing:
Enclosure protection IP22.
Case and reusable probe suitable for cleaning and disinfection with hospital-grade cleaning products.
Overall device and probe weight < 300 g.
Electrical characteristics:
Operated by rechargeable, non-replaceable Li-ion battery power supply.
External AC battery charger, plug style and voltage as per local supply.
Charger certified to IEC 60601-1.
Protection against defibrillator discharges.
Suitable for operating by mains power and by battery.
Automatic switch between battery and mains powered modes.
The display shows which power source is in use.
Running time on battery only ≥ 12 hours (24h at lowest screen brightness and beep tone turned off).
Features:
Suitable for detection in low perfusion conditions.
Design enables use in demanding environments, e.g. shock, vibration.
Automatic correction for movement and ambient light artefacts.
Audible and visual alarms for low saturation and high/low pulse rate, thresholds settable by user.
Audible and visual alarms for sensor error or disconnected, system errors, low battery.
Alarm override and temporary silencing function.
Capable of working with, and supplied with, adult, paediatric and neonatal reusable probes.
Fast and safe adjustment of the press table height using a braked winch. Hand operated workshop press. Hard chrome piston and very long stroke of 300mm. Available from 40 to100 tons. Foot operated air approach feature.
Machine Features:
Fast and safe adjustment of the press table height using a braked winch
Movable cylinder
Foot operated air approach feature
Fast air return
Wide insertion width
Hard chrome piston and very long stroke of 300mm
Handheld, portable, rechargeable battery powered pulse oximeter, displaying patient oxygen saturation (SpO2), pulse rate and respiratory rate in real time.
Features:
Suitable for detection in low perfusion conditions down to perfusion index of 0.1%.
Design enables use in demanding environments, e.g. shock, vibration
Automatic correction for movement and ambient light artefacts
Audible and visual alarms for sensor error or disconnected, system errors, low battery.
Measurement:
SpO2, pulse rate and respiratory rate monitor, for infants, children, adults.
SpO2 detection includes the range: 70 - 100 %.
SpO2 resolution: 1 %.
SpO2 accuracy (in the range at least 70 - 100%): ± 2% (no motion, low perfusion), ± 3% (motion) for all patients (infants, children and adults).
Pulse Rate detection includes the range: 25 - 240 bpm.
Pulse Rate resolution: 1 bpm.
Pulse Rate accuracy: within ± 3 bpm (no motion, low perfusion), ± 5 bpm (motion) for all patients (infants, children, adults).
Respiratory rate includes the range: 4 to 90 rpm.
Respiratory rate resolution: 1 rpm
Respiratory rate accuracy within ± 1 rpm in ideal conditions
Electrical characteristics:
Operated by rechargeable, non-replaceable Li-ion battery, power supply
External AC battery charger, plug style and voltage as per local supply.
Charger certified to IEC 60601-1.
Protection against defibrillator discharges.
Suitable for operation by battery and by mains power supply, if connected and/or recharging.
Automatic switch between battery and mains powered modes, when recharging or in mains power failure.
The display shows which power source is in use.
Running time on battery only ≥ 12 hours (24h at lowest screen brightness and beep tone turned off).
Automatic power-off after period of no use.
Display:
Data display refresh rate ≤ 1 s
Display with main parameters: %SpO2, pulse rate, respiratory rate, signal quality, status messages, battery state indication.
Patient age group input feature.
Display indicates high and normal respiratory rate count for inputted age.
Display indicates when SpO2 < 90% (hypoxaemia per WHO guidelines.)
Casing:
Enclosure protection IPX2.
Case and probe suitable for cleaning and disinfection with hospital-grade cleaning products.
Overall device and probe weight < 300 g.
It is considered essential equipment for health structures and emergency rescue team (to be available in emergency room, delivery room, operating theatre, intensive care unit, ambulance, etc.). Resuscitators are used for ventilation assistance in critical situations of respiratory distress or failure. Resuscitator intended for full-term babies, preterm and low-weight infants up to 7 kg.
....
It is considered essential equipment for health structures and emergency rescue team (to be available in emergency room, delivery room, operating theatre, intensive care unit, ambulance, etc.). Resuscitators are used for ventilation assistance in critical situations of respiratory distress or failure.
Hand-operated in a horizontal position.
Portable, self-inflating, reusable.
The resuscitator is equipped with a non-rebreather valve.
An oxygen reservoir bag should be included with a capacity between 600-2 ,600 ml.
Resuscitator can be fully disassembled, is easy to clean, disinfect, and reassemble.
The resuscitator is equipped with a pressure release (limiting) valve which safeguards against generating ventilation pressures over 45 cmH?O, while still allowing for an airway pressure of at least 30 cmH?O.
The resuscitator is autoclavable between 121°C and 134°C.
The capacity of the self-inflating ventilation bag is 500ml.
Ventilation can be done with ambient air or with oxygen.
The resuscitator has an inlet valve with a nipple for oxygen tubing.
All parts manufactured from high-strength, long-life materials that require no special maintenance or storage conditions.
The resuscitator, all its components and accessories are free of natural rubber latex.
The pressure release valve should allow to be overridden by the user when higher pressures need to be generated in the airways.
When the pressure release valve is not overridden by the user, it should either automatically return to its default position whereby it protects against excess pressures, or be clearly visible so there is no doubt as to its closed position, even during an emergencies. To ensure users are fully aware that the limiting valve is in closed position.
Hand-operated in a horizontal position.
Portable, self-inflating, reusable.
Ventilation can be done with ambient air or with oxygen.
The resuscitator has an inlet valve with a nipple for oxygen tubing.
The resuscitator is equipped with a non-rebreather valve.
An oxygen reservoir bag should be included with a capacity between 2 ,500-2,600ml.
Resuscitator can be fully disassembled, is easy to clean, disinfect, and reassemble.
All parts manufactured from high-strength, long-life materials that require no special maintenance or storage conditions.
The resuscitator, all its components and accessories are free of natural rubber latex.
The resuscitator is autoclavable between 121°C and 134°C.
The capacity of the self-inflating ventilation bag is 1,600ml.
The product structure is a double cylinder type, which is mainly composed of a box body, a double cylinder system, a hand wheel and a rubber tube.
Size: 250*210*265mm, The limit of suction pressure is less than 60KPa
Handheld LCR Meter Electronic Engineering Lab
....-lab-1114723563.jpg "Concave Convex Mirror (Handheld)")
Concave Convex Mirror (Handheld)
....
Hand held, battery powered device that measures the oxygen concentration in a flow of gas from a medical gas source or, with adapters, through a medical gas-flow device such as a ventilator or anaesthesia system. The intended application is checking gas supply equipment performance.
Operational Characteristics:
Suitable for measuring gas supply with pressure up to 50 psi (344 kPa)
Response time < 20 s.
Warm-up time < 1 s.
Flow rate measurement: up to 10 LPM
Flow rate accuracy within ± 0.2 LPM
Flow rate resolution 0.1 LPM
Display visualizing O2 concentration, flow rate, system messages and battery status.
Ultrasonic oxygen sensing technology, with permanent sensing chamber.
O2 measurement to include the range 21 - 96%.
O2 accuracy: within ± 1.5% of full scale.
O2 resolution: 0.1%.
Handheld, battery powered device that measures the oxygen concentrationin a flow of gas from a medical gas source or, with adapters, through a medical gas-flow device such as a ventilator or anaesthesia system, or within an environment such as oxygen hood and infant incubator.
Operational characteristics:
Handheld oxygen analyzer for continuous measurement of the oxygen concentration from a medical gas source and in an environment.
Suitable for measuring gas supply with pressure up to 50 psi (344 kPa).
Response time: ≤ 20 s.
Electrochemical cell oxygen sensing technology.
O2 resolution: 0.1 %.
O2 measurement includes the range 0.0 - 100%.
O2 accuracy: within ± 3 %.
Warm-up time: none required
Display visualizing O2 concentration, system messages and battery status.
Internal calibration timer (weekly); alerts the operator, using a calibration icon on the LCD display, to perform a unit calibration one week after previous calibration.
Low and high oxygen concentration alarm system, with flashing LED and audible indication of alarm conditions.
Replaceable oxygen sensor cell, expected sensor life >1,500,000 O2% hours over 2 years in typical applications.
Calibration and self-test mode, one point calibration 20.9% or 100%.
Size: 24cm high, speaker diameter: 15cm, with recording, propaganda, volume adjustable, battery powered.
....
It is a tool specialized to punch holes on nonmetal parts: cork wood and rubber.
....
It is used to grind and scrap cutting edge of puncher and it consists of scraper cover, casing and oil stone.
....
Concrete flexural machine 150 kN hand operated 1 gauge to perform flexural tests on concerte beam specimens max. dimensions 150x150x750 (600) mm.
....
