Psychiatric Bed Mattress with inbuilt Pillow
....
The unit provides different configurations of control gears, which serve as an introduction togear engineering. The unit focuses in particular on the practical assembly ofgear components. The exercise system can be used to configure six differentgears in various combinations. Control gears are also known as variable or change gears.They are characterised by the fact that the speed is transferred differentlyvia various pairs of gear wheels. The most famous example is the transmissionin a car, which has one pair of gear wheels for each gear. The setup of the components is flexible so thatyou can configure your own ideas and try out different gears. The unit is driven by a handcrank. A solid frame made of square steel tubes and various bearings ensuressufficient accuracy to be able to set precise tooth interlocking. Allcomponents of the exercise system are ready at hand and securely housed in astorage system. Individual activities such as understanding the task and reading the drawing, assemblingthe components, adjusting, calibrating and checking the gear, and performingcalculations are performed one after the other.
Features:
Flexible and robust assembly kit for continuing mechanicalgear engineering.
Quick and simple assembly.
Uses industrial components to represent the real worldaccurately.
The refrigerator circuit is made ofcopper pipes.The set of equipment and the vacuum and recharge station allow a fastassembly and disassembly of the refrigerator circuit. The Trainer On Industrial Refrigerators With One Evaporator And An Open Type Compressor With Fault Simulation allows to study the circuit layout adopted in the normal industrial refrigerators fitted with water evaporator and an open-type compressor. The student can rise his knowledge about the main components of arefrigerator plant, experiment the problems due to the filling and the emptying of the circuit and, at last, simulate some simplefaults. The refrigerant is Freon R134a (HFC), CFC free, and the unitincludes the measuring instruments that are necessary to survey operating parameters and to test the refrigerator circuit. A wheeled frame carries a horizontal working panel, fitted with a 80 mm vice, and a vertical frame, where the maincomponents of the unit and a silk-screen printed synoptic panel are mounted at sight.
Required services of Trainer On Industrial Refrigerators With One Evaporator And An Open Type Compressor With Fault Simulation
Flocculation chemicals can be added to the rawwater in order to improve the flotation of the contaminants. The diatomiteprovided is suitable as a contaminant. Flotationprocesses are used to separate solids from a liquid. The flotation process mostcommonly used in water treatment is dissolved air flotation. The suspension tobe treated is placed in a tank. A pump transports the raw water, whichenters the flotation column via a vertical pipe. The air dissolves in the water under pressure. Part of the waterflows back to the pump via a bypass. The other part of the water enters apressure vessel filled with Pall rings. The height of the supply linecan be adjusted. The pressure vessel ensures asufficiently long dwell time to dissolve the air and to separate undissolvedair. A water circuit with pump is connected to the flotationcolumn. Two compressors supply air to the water circuit on the suction side ofthe pump.
The water then enters the flotation column from below via a valve. This causesa sudden drop in pressure to almost atmospheric pressure. The contaminants rise up in thecolumn together with the air bubbles. At the upper end of the flotation column,the contaminants enter a circulating channel. Since the solubilityof air increases with increasing pressure, the excess air forms small bubbles.The air bubbles accumulate on the contaminants.
Features:
Transparenttank for observing the processes
Mechanicalwater treatment
Features:
Processcontroller with touch screen
Biologicalwastewater treatment
Sequencing Batch Reactor (SBR)
Specification:
Measurementof pH value, temperature and oxygen concentration
Discontinuousactivated sludge process
Floatingdevice for extraction of the treated water
Meteringdevice for external carbon source
SequencingBatch Reactor (SBR)
Flow meterfor aeration
Tanks forwastewater and treated water
Stirringmachine with timer and continuously adjustable speed
Compressorwith timer for aeration
Foundation Fieldbus is an all-digital, multi-drop communication system used for basic and advanced flow control, temperature control, and tank level control utilized primarily in places like oil refineries, chemical plants, and paper mills. Specifically, this learning system covers major Foundation Fieldbus Process Control topics, including an overview of Foundation Fieldbus Industrial Network Communication technology, H1 Foundation Fieldbus wiring and connections, device configuration, and field device calibration and operation. Foundation Fieldbus Process Control Learning System covers a popular industrial method for calibrating and troubleshooting valves and transmitters connected to a network.
Learners will also us world-class, highly interactive multimedia to gain insight into the theoretical aspects of Foundation Fieldbus and to follow along with step-by-step explanations of hands-on skills, such as identifying the components of a Foundation Fieldbus segment and configuring a Foundation Fieldbus field device. The Foundation Fieldbus Process Control Learning System connects to the Level/Flow Process Control Learning System and the Portable PLC Learning System to teach this highly-effective communication protocol.
Features:
Foundation Fieldbus is an all-digital, multi-drop communication system used in oil refineries, chemical plants, and paper mills
Foundation Fieldbus is a popular industrial network for calibrating and troubleshooting valves and transmitters
Curriculum focusses on Foundational Fieldbus network concepts, applications, and functions.
Real-world process control components allow for real-world skill building.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Stainless steel table provides more convenience in usage and maintenance.
Servo hydraulic controlling system features precision in control, little noise and reduced low energy consumption.
Dynamic display of load, displacement, time and real-time testing curve on the screen.
Constant loading speed test supported.
Servo hydraulic system consumes no energy under non-testing states, which saves energy and emits low heat.
Reduced footprint requires little lab space.
Capable of holding on maximum displacement.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing control procedures and a wide range of instruction types. Also supports dynamic instruction parameter assignment.
The major advantage of AC three-phase over DC power systems isthat the electrical power is generated economically in large power stationsrelatively far from the end users, transported at high voltage over longdistances with very little power loss and finally made available to theconsumers providing them with two different levels of voltage depending on theapplication needs. Today, the public electric power is supplied almostexclusively using three-phase systems with frequency of 50 or 60 Hz, dependingon the country.
....
Mounts vertically and spans the test section of an Educational Wind Tunnel
Angular position is adjustable
Comes with ample tubing
24 flush-mounted pressure taps around its circumference
Outside diameter of 4 inches (10.16 cm).
The Steam Power Plant is specifically designed for training purposes in the field of power plant engineering with process control systems. The system operates very similarly to real large-scale plants due to the high degree of complexity.
The entire system is monitored, actuators regulated and controlled, measurements recorded and displayed via the process control system. Large process engineering systems, such as steam power plants, are managed with process control systems (PCS).
Features:
Plant monitored and controlled via touch screen control station
Complete laboratory-sized steam power plant
Process control system based on Ethernet and PLC.
The apparatus has two transparent tanks, mounted one above the other. A variable-speed pump transfers water from the reservoir (in the base of the unit) into the upper tank. PLC Process gives students and engineers practical experience of the principles and application of programmable logic controllers (PLCs). The object is to connect and program an external, programmable logic controller to monitor and control the level and flow rate of water in a two-tank system. The pump control is on or off, but a manual control allows the user to set the speed. A float switch in the reservoir monitors the level of water. The water can drain down to the lower tank and then back into the reservoir. Solenoid valves may be individually opened or closed to control and redirect the movement of the water.
....
The Production Assembly Learning System includes a mobile workstation, mechanical panels, hose kit, fastener kit, fitting kit, bin kit, consumables kit, miscellaneous tool kit, torque fixture kit, torquing fasteners panel, fitting torque wrenches panel, back-up wrenches panel, electric and pneumatic tools panel, protective plug cap kit, CD-ROM based student learning materials for both theory and lab, and teachers assessment guide. Production Assembly Learning System uses industrial quality components to help assure that students are better prepared for what they will encounter on the job and to withstand frequent student use. The CD-ROM based curriculum includes virtual simulation of key skills, allowing learners to practice skills in advance of actually working on the equipment. The CD-ROM based curriculum can be accessed locally or web delivered, allowing businesses to increase delivery of high quality assembly practices in far flung organizations.
The Production Assembly Learning System teaches fundamentals of assembly skills used throughout modern industry. Students will learn industry-relevant skills including how to identify and safely handle torque wrenches, operate both click-type and air impulse torque wrenches, properly sequence fittings, install, operate and maintain O-rings and lip seals, assemble hoses and couplings, route hoses including using clamps, brackets and clips, identify and install STOR and Zerk hydraulic fittings, and handle both steel and plastic tubing. High quality assembly skills are in short supply, with the impact being more product failures which lead to increased costs, customer dissatisfaction, and in some cases, safety issues.
Options available to expand the Production Assembly Learning System even further include a split flange learning system, stall bar learning system, electric torque wrench learning system, and instrumented DC-electric torque wrench learning system.
Features:
High Quality Assembly Skills and Troubleshooting Knowledge
Multimedia Curriculum
Industrial Size Components
Interactive CD-ROM Curriculum with Virtual Simulation
Student Reference Guide
Heavy Duty Steel Workstation
Safe Power Level-24 VDC.
Suitable for use in resource-limited settings. For the separation of heterogeneous mixtures or samples in clinical laboratory applications.
....
Non-toxic, bright, assorted colors; packed in neutral film in easy separable blocks, over-packed in supplier's own packaging. Clay, modeling, box of minimum 6 - maximum 8 sticks with a total weight of 500g.
....
Basic container for soiled dressings during nursing and surgical care.
Smooth surface.
Material: Austenitic stainless steel.
Austenitic stainless steel composition: 18 - 20% chromium, 8 - 10 % nickel.
Reusable.
Container, kidney shaped.
Capacity: approx. 800 to 850ml.
Thickness: approx. 0.75-0.85mm.
Length: approx. 240-260 mm.
Width: approx. 130-150mm.
Height: approx. 30-50mm.
Mobile LED phototherapy unit AC powered including accessories. Jaundice, a yellowish discoloration of the skin, eyes, and mucous membranes, is a major symptom observed when bilirubin levels in blood rise above 5 mg/dL. Phototherapy units are used to treat hyperbilirubinemia, a condition characterized by high bilirubin concentrations in the blood. Bilirubin, a product of haemoglobin breakdown, remains in the body until the liver can convert it to a form that can be excreted.
....
Hardened & Tempered
Drop Forged Carbon Steel
Fitted with Chemically Treated & Seasoned Wood Handle.
Fully Automated Specimen Processing And Striking For Culturing
....
