Endotracheal tube shall meet the standards concerning the dimension, the tube, the point, the cuff and the marking.
Endotracheal tube with:
Cuff located near the distal end: Low pressure cuff, inflating system with valve and Luer tip connector.
Standard connector (ext. Ø 15mm) at the proximal end enabling the tube to be connected to the ventilation system.
Open distal end and Magill-type point with oral angle of 37.5º.
Radio opaque mark.
With Murhpy's eye.
Material: Polyvinyl chloride (PVC).
Sterile.
Disposable.
Graduations.
Size: Ø internal 8mm.
Initial sterilisation method: Ethylene oxide gas or Gamma radiation.
To transfer liquids in clinical laboratory settings applicable for molecular/PCR & sterile microbiological works.
....
The acquired data is processed by evaluation software on a PC. The data acquisition system significantly enhances the possibilities offered by the assembly project. The two systems together form a state-of-the-art materials tester with data acquisition, suitable for a wide range of experiments. The fully assembled presents a real, fully functional data acquisition system for the measurement of pressure (forces) on, and changes in length of, a test specimen. All the necessary tools and aids, as well as comprehensive instructional material, are included. The assembly process includes the basic mechanical construction and wiring as per the circuit diagram.
....
Semi-rigid, transparent.
Oro-pharyngeal airway, Guedel type.
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Initial sterilisation method:
Proximal (or buccal) end straight and reinforced.
Flange colour coded and/or marked with corresponding size number.
Size: Airway Guedel, size 00, length approximately 40mm.
Ethylene oxide gas or gamma radiation.
Proximal (or buccal) end straight and reinforced.
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Flange colour coded and/or marked with corresponding size number.
Oro-pharyngeal airway, Guedel type.
Semi-rigid, transparent.
Size: Airway Guedel, size 1, length approximately 60mm.
Initial sterilisation method:
Ethylene oxide gas or gamma radiation.
Oro-pharyngeal airway, Guedel type.
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Proximal (or buccal) end straight and reinforced.
Flange colour coded and/or marked with corresponding size number.
Semi-rigid, transparent.
Size: Airway Guedel, size 0, Length approximately 50mm.
Initial sterilisation method:
Ethylene oxide gas or gamma radiation.
Electric Vehicle Vacuum Booster Brake System Trainer uses original electric vehicle electric vacuum booster brake system, it can demonstrate the working principle of electric vacuum booster braking system for electric vehicle, to perform training operation for electric vehicle electric vacuum booster brake system adjustment and emptying maintenance.
Structure and composition:
Electric vacuum booster braking system for electric vehicle: brake mechanism, seat, brake booster and other components.
Product Functions:
Brake booster cutaway device, an intuitively understanding of working condition of the brake booster
Dynamically demonstrate the working principle of the electric vehicle vacuum assisted braking system
Achieve electric vehicle vacuum booster brake system adjustment and emptying maintenance and other training operations
Achieve practical operation of assembly and disassembly and components maintenance of electric vehicle vacuum assisted braking system.
Proximal (or buccal) end straight and reinforced.
Flange colour coded and/or marked with corresponding size number.
Oro-pharyngeal airway, Guedel type.
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Semi-rigid, transparent.
Size: Airway Guedel, size 2, Length approximately 70mm.
Initial sterilisation method:
Ethylene oxide gas or gamma radiation.
Oro-pharyngeal airway, Guedel type.
Material: Polyethylene/vinyl acetate (EVA) - Polyvinyl chloride (PVC).
Sterile, single patient use.
Semi-rigid, transparent.
Proximal (or buccal) end straight and reinforced.
Flange colour coded and/or marked with corresponding size number.
Initial sterilisation method:
Ethylene oxide gas or gamma radiation.
Size: Airway Guedel, size 3, Length approximately 80mm.
Applicable for molecular/PCR & sterile microbiological works. Various clinical laboratory usage conditions including; Sample cold storage, sample preparation/extractions with water bath, incubator and centrifuge.
....
Applicable for molecular/PCR & sterile microbiological works. Various clinical laboratory uses including Centrifugation and short-term sample storage.
....
High absorbent surgical grade cotton wool.
Material: 100% cotton surgical grade, purified, bleached, and carded.
Not pre-cut.
Roll presentation.
Water absorbent.
Single use.
Non-sterile.
Size selected: Cotton wool, roll of 500g.
Net weight: 500g.
Non sterile gauze roll with selvedge
Material: Absorbent gauze, 100% cotton.
Type of gauze: 17 threads/cm2 (grammage 23g /m2).
Non-detectable by X-ray
Components: Bleached, purified textile, plain weave.
Size selected: Gauze roll (gauze folded in zigzag could be an alternative).
Length:100m.
Width: 65 to 90cm.
Non-sterile.
Single use
Thread count:
Weft: 66 to 74 threads/dm.
Warp: 95 to 105 threads/dm.
Weight: +/- 23g/m2.
Non sterile gauze compress, folded edges, pack of 100 units.
Material: Absorbent gauze, 100 % cotton.
Non-detectable by X-ray.
Components: Bleached, purified textile, plain weave.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Number of folds (thickness): 12 ply
Non-sterile.
Single use
Size selected: Compress gauze folded.
Length: 10cm.
Width: 10cm.
Thread count:
Weft: 66 to 74 threads/dm.
Warp: 95 to 105 threads/dm.
Weight: +/- 23g/m2.
Non sterile umbilical tape roll.
Material: 100 % cotton.
Ligature thread for umbilical cord.
Braided and flat.
Non-absorbable.
Size selected: Tape umbilical roll.
Length: 50m.
Width: 3mm.
Non-sterile.
Single use.
Non-detectable by X-ray.
Material:
Netting material: absorbent gauze, 100% cotton.
Paraffin substance: mixture of balsam of Peru (approximately 1g) and soft paraffin Q. Suff. (approximately 100g).
Components:
Elastic-netting material with large mesh, impregnated with soft paraffin based material.
Sterile.
Disposable.
Initial sterilisation method:
Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, paraffin.
Width: approximately 10cm.
Length: approximately 10cm.
Gauze compress, surgical folding, i.e. so that there are no free threads apparent after folding or when the first outside fold is opened. Non-detectable by X-ray.
Thread count warp 95 to 105 threads/dm;
Material: Absorbent gauze, 100% cotton.
Sterile.
Disposable.
Type of gauze: 17 threads/cm2 (grammage 23g/m2).
Components: Bleached, purified textile, plain weave.
Number of folds (thickness): 12.
Initial sterilisation method: Ethylene oxide gas or ionising radiation.
Size selected: Compress, gauze, folded.
Width: approximately 10cm.
Length: approximately 10cm
Weft 66 to 74 threads/dm
Weight: Approximately 23g/m2.
Sterile IV giving set with graduated chamber (burette) enabling precise volume and slow administration of infusion or injectable medicine.
Fitted with a protecting cap.
Air inlet: plastic (ABS: acrylonitrile butadiene styrene)
Incorporated into the perforator. Fitted with an air filter (bacteriological filter).
Tube: plastic (PVC: polyvinyl chloride). Transparent (allowing the detection of air bubbles). Resistant to kinking.
Length is approximately 150cm (overall IV giving set length approximately 170cm). Internal / external diameter is approximately 3mm / 4mm.
Plastic Perforator: plastic (polyacetate).
Hollow device located at the proximal end of the infusion set allowing it to be connected to the infusion bottle or bag. Composed of a tapering tube mounted on a base ensuring a good seal between the set and the infusion bottle or bag.
Drop-counting chamber:
Located under the graduated chamber. Calibrated 60 drops/ml. Fitted with a 15µ polyamide filter.
Graduated chamber (burette): plastic (PS: polystyrene).
Transparent. Capacity: approximately 100-150ml. Graduations every ml. Connected to the perforator by a tube (approximatey 15cm).
Security gauge:
Automatic shut off valve, to stop the infusion as soon as the pre-set volume has flown away in order to prevent air entering the drop-counting chamber and/or the tube.
Flow regulator: plastic (ABS: acrylonitrile butadiene styrene).
Ensures the flow regularity during the IV administration.
Injection portal: plastic (ABS: acrylonitrile butadiene styrene)+ synthetic rubber.
Terminal connection (stopper): plastic (ABS: acrylonitrile butadiene styrene).
Allows introducing precise volume of injectable medicines into the infusion flow.
With Luer lock connector.
Sterile.
Single use.
It consists of printed 0°-360°' base, φ20mm campass.
Support rod, vertical rod.Size of vertical rod:≥40mm,Can be vertically inserted into the base.
Angle plate which is a adjusted φ120mm semi-circle with projection hole and screen hole at both ends.
Sterile single use device used for parenteral administration of infusions (IV fluids) by gravity.
Precision flow regulator: Smooth roller clamp to facilitate easy, safe control and adjustment of fluid rates.
Drop counting chamber: Transparent drip chamber, calibrated at 20 drops/ml, with 15-20μm fluid filter.
Tubing: Transparent tubing, minimum length 150cm, with injection site latex or latex-free (or Y-injection port), with distal connector preferably Luer Lock connector.
Single use
Sterile
Device components:
Perforator: Sharp piercing device with protective cap.
Air inlet: With integrated bacteriological filter.
