We also supply additional equipment which can be used in conjunction with the towing carriage for model manufacturing & measuring facilities:
Educational Wake Rake with Integrated Pressure Transducers
Educational 1.5m Offshore Support Vessel / Trawler Model
Educational Scaled Model Guiding Arms
Educational High Speed Camera System
Tank Pit mounted Offshore & floor mounted static model 6 component balance.
Set of Educational Scaled Propeller models.
High Speed / Frame Rate Camera system for observing cavitation.
Window mounting hydrophone system for use in the educational cavitation tunnels.
Educational Wake Rake with integrated pressure transducers for measuring the wake profile within the tunnel.
Flat Plate and Cylinder Model Experiment for use in Tunnels.
Pitot Static tube for use in measuring section of Tunnel.
Well Bore Hydraulic Demonstrator is designed to replicate many of the hydraulic conditions encountered in drilling operations. The Well Bore Hydraulic Demonstrator is a valuable tool for training process operators. These conditions are produced in a replica well-bore manufactured from industrial clear PVC that allows students to observe the flow patterns.
The Well Bore Hydraulic Demonstrator is equipped with process indication and manual control devices including metering valves and pressure gauges. Oil water and air represent the three common well-bore fluids liquid hydrocarbons, gaseous hydrocarbons, and produced water. The process fluids are recycled allowing for continuous operation without the discharge of either the oil or the water. The Well Bore Hydraulic Demonstrator is controlled by manually adjusting the various flow control valves.
Function:
The operator has control over several aspects of the flow inside the well-bore; the flow direction fluid flow rates, and the distance that the tubing is above the bottom of the hole. Throughout the well servicing and well production phases, the operator will create different flow patterns in the well-bore. The operator must balance these parameters to successfully achieve:
Containment of hydrocarbon-contaminated water
Control liquid flow rates
Positive control of well pressure
Safe Drilling and Servicing Operations
Containment of gas and liquid kicks
Almost all the new generation commercial and military aircraft utilize electronic displays in the cockpit. Training imparted on an ARINC 429 based EFIS will prepare the students to easily understand other EFIS based on other versions of commercial and military avionics data busses. EFIS Trainer has been designed to enable avionics students to understand a typical digital bus EFIS system, and to perform maintenance and troubleshooting tasks that are typically encountered by avionics maintenance personnel. Electronic Flight Instrument System is the essential component of Glass Cockpit. he most widely used avionics data interface standards. It has been installed on many commercial passenger and transport aircraft including Airbus A310/A320 and A330/A340, Bell Helicopters, Boeing727, 737, 747, 757, 767. The fault panel allows for the simulation of typical aircraft EFISi nstallation faults including sensor feed faults. The faults are easy to select but not apparent to the student. A numbered switch panel or patching panel with cover is provided. The EFIS Trainer is based on Two Display Units, a Symbol Generator, a Control Unit, a Signal Simulator, and an Instructors Panel. Electronic displays are multi mode with ADI, HIS and Map modes. Map mode allows for superposition of Weather Radar data and sector display. Wiring harnesses in the trainer are representative of aircraft standards in hardware and wiring / looming techniques. Interconnect diagrams and panel circuit and layout diagrams are also provided.
....
Utilisingthe service unit the experiments rapidly mount onto the multifunctional workpanel and is connected to the built-in water supply via quick connectcouplings. Differential pressure reading is taken using a digital manometeragainst varying flow rates.
The Fluid Energy Losses in Straight Pipes Tray provides hands on experimentation designed to demonstrate energy losses due to the geometry of the flow path atdifferent flow rates.
Th etray includes the following Hydraulic Circuits:
Contractionand expansion 8mm 4mm 8mm diameters
Smooth and Roughened pipe 6mm diameter
Stress Grading of Timber Joists system allows pressure to be applied simultaneously from one pump. Point loading is applied using the Dual hydraulic ram system.
A set of three dial gauges is required to measure the curvature of the beam in the central region of constant bending moment. Stress Grading of Timber Joists comprises a technical manual, which contains details of the selection of a timber beam and setting up for a four point loading test.
Experimental Capabilities:
Effect of moisture content.
Study of commercial grading of timber for structural design and construction.
Wind Tunnel Test Instrument
....
Strain gauges are used extensively in sensor systems to detect forces, moments and deformations. Three test specimens for tension, bending and torsion are each fitted with four strain gauge measuring points. The experimental unit provides a wide-ranging introduction to the fundamentals of measurement by strain gauges. The strain gauges are wired in the full bridge. The specimens are loaded incrementally allowing for the strain reading to be sequentially monitored. The specimens can be inserted quickly and precisely into the frame. The digital display also features a zero balancing function to allow for any preloading. The strain gauge measuring range is protected by a Plexiglas cover, which also makes it clearly visible for inspection purposes. The measurement amplifier supplies the bridge supply voltage, and displays the load-dependent "bridge detuning" digitally in voltage values.
....
The distributor's mainfunction is to route secondary, or high voltage, current from the ignition coilto the spark plugs in the correct firing order, and for the correct amount oftime. A distributor isan enclosed rotating shaft used in spark-ignition internal combustionengines that have mechanically-timed ignition.
....
This kit contains a selection of resistance strain gauges,together with all the necessary accessories associated with their application. The adhesive included is acyanoacrylate single-agent pressure-sensitive type, and therefore the completeoperation of deciding where the gauge is to be placed to taking strain readingscan be completed in a few minutes. Each kit is supplied in a PVC carrying case. Also included are the appropriate cleaningagents, terminal strips and sundry items such as tissues, pressure sensitivetape etc. The quantities of the items in the kit areadequate for the installation of all the strain gauges. Primarily intended as a convenient form of generalpurpose kit, itwill prove particularly valuable to: (a) the non-specialist, who occasionally appliesstrain gauge techniques but has not acquired the experience to specify individual items with confidence; (b) the specialist who is required to performstrain analysis outside the laboratory at short notice; and (c) teaching staffin educational establishments required to demonstrate the technique and toconstruct experimental apparatus.
....
Motorized draw-head assembly automatically compensates for specimen elongation and keeps loading bar with excellent load accuracy of +/- 0.5% guaranteed.
Both room temperature and elevated temperature systems are available
Furnace and chambers available with temperature ranges from 200C to 1100Cin common air environments
Control system owns the three closed control function as load control, extension control, and velocity control. High precise control and accurate load with load measurement resolution reach 1/300000; the loading testing curve can be plotted automatically.
This Series creep testing machine applies advanced servo motor and ball screw actuator which assure loading conveniently and simply. The drive system comprises a printed circuit motor with toothed belt and gearbox to the recirculating ball screw actuator.
Additionally, manual operation also be offered, users can unload to protect the apparatus by hand, especial the load cell, when suddenly power cut off.
Software owns powerful function offering specimens registration, apparatus control, test data acquisition and store, test result inquiring, data processing and test report export
Numerous high temperature pull rods, specimen holders, furnace systems and extensometers available for creep and stress Relaxation applications. Many of which are also adaptable to hot tensile testing applications on universal testing machines.
Remote communication control function saves your operators invigilation during testing process; alarm message can be transmitted to your mobile phone to inform you test situation by equipping with special dial number device.
Features a large test space that satisfies both GB requirements (longer than 60 times the specimens diameter), as well as American and European requirements (not less than 2.4 meters).
Real-time drawing of curves of remaining load with time, or temperature with time.
Support saving, instant retrieving and inspection of testing results.
Capable of re-analyzing test data and curves, and partial zooming of testing curves at will.
The measurement and control system is capable of backing up the transducers calibration data, improving the systems maintenance reliability.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Integrated with travel limit protection and full scale overload protection.
Open testing report, support custom testing template, automatic generation of testing report, which can be printed, previewed or saved as files.
Support Excel report templates and customized editing of test reports.
Algorithm to predict specimens stress relaxation performance after 1000 hours (or any specified value in hours), with the option of single or double logarithm. Capable of predicting with standard specimen data or real-time collected data (Suggested). Integrated with an extensive specimen library to improve the precision and reliability of testing results.
The Control and Instrumentation Study Station uses industry-standard parts to teach industrial process control. Two valves control the flow of the water supplies into a process vessel. Hot and cold water supplies connect to the study station. It is an excellent tool to help train plant technicians and process control engineers.
The process vessel has three jobs:
A pressure vessel with a pressure-relief valve for safety
A liquid-level reservoir with a sight gauge
A temperature-mixing chamber for the hot and cold water flows
Temperature and flow data obtained can be used to calculate energy balance, heat transfer and heat transfer coefficients.
A valve is provided to reverse the tube-side flow direction. The two exchangers are of similar surface area but with unique design features. The Heat Exchanger Demonstrator consists of two heat exchangers with associated temperature indicators, flow indicators and a temperature indicating controller.
Plate exchanger with stainless steel plates
Single pass shell and tube exchanger brass
Function:
The Heat Exchanger Demonstrator is connected to hot and cool tap water. Trainees select exchanger type, flow direction and flow rate then read and record the flows and temperatures for further analysis. Process (hot) water flow is manually controlled. Cooling water flow may be either manually controlled or automatically controlled to a selected process temperature set-point.
Three degrees of freedom instrument panel permits full demon stration of attitude and directional gyro functions. The Cockpit Instrumentation System with Electronic Flight Instruments and electronic engine display.
Standard Features:
Functional engine monitoring system connected to engine sensors
Provision of engine sensor simulation
Functional digital primary flight display mounted on a panel that can simulate roll,pitch, and yaw movements controlled by a mechanism operated by a control yoke.
Functional pitot- static system with provision for conducting pitot static system checks
Standby Instruments installed.
Specially designed extended grip jaws are equipped for pre-loading tension on concrete steel strand. This series is also capable of both static tensile, compression tests and quasi-dynamic tests including low-cycle fatigue tests. Apply appropriate grips to perform tension on metal bar, plate and threaded iron. Meanwhile, applicable grips provide capability of tension and compression on metals or concrete.
The mechanical components collaborate with the pioneered modular Test Live computer testing software to ensure the stability, precision and reliability of the whole system. This product features a firm structure as well as steady loads, precise controls and is intuitive to operate. It adopts the leading high-performance Controller, which is usually equipped on high-end material testing machines.
Loading unit is the independent modular servo drive unit, reasonable structure compact, powerful function, flexible installation and configuration, can satisfy various kinds of models for different loading unit to install location demand.
This slow strain rate (SSRT) constant corrosion (SCC) testing machine is mainly used for inspection, research of metal material static lasting tensile, creep, stress corrosion and the mechanical property test, etc can be used in NaOH, methanol, N2O4, NH3, NO3, H2S, CL solution, wet air and water, and other media environment of metal stress corrosion damage characteristic test.
Features:
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Event data can be saved, test can continue to be interrupted when the power supply test.
The machine Supports more than 20 days of continuous testing.
Four specimen can be tensile test at one time.
Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching in between.
Domestically pioneered open-testing-method settings. Engineers may set up testing projects then operators may employ the projects for testing, greatly reduced the difficulty of the operations and the requirement in the skills and trainings of the operator.
Capable of statistical operations on testing data (average, standard deviation, coefficient of variance).
Automatic requesting for testing result data, also capable of launching an advanced analysis to inspect the data.
Domestically pioneered process-oriented design of testing control. Provides users with intuitive testing control procedures and a wide range of instruction types. Also supports dynamic instruction parameter assignment.
Domestically pioneered highly efficient three-level operation model of testing data processing. Supports open testing data processing, appending custom testing data items and re-inspection of processed testing data.
Characteristic testing data can be marked on testing graphs.
This trainer includes a clear horizontal primary separator vessel. The process has manual control valves with rotameters and is intended to demonstrate oilfield separation principles with basic visual manual operation. The three phase separator demonstration apparatus is a small scale vessel that performs continuous separation of a mixture of oil, air and water. The primary separation operation for crude oil occurs when the crude stream flows through a vessel of sufficient capacity to allow gravity separation of the gas, liquid hydrocarbon and water phases. It is available in horizontal and vertical orientations.
Function:
This fluid mixture then flows into a separator vessel fabricated of clear materials. The oil and water are recycled the air is vented to atmosphere. This process trainer blends air, water and refined oil to emulate a crude oil stream.
1a Plane Frame With Strain Gauges is made from fully welded hollow square section steel members making a 45° truss. The end mountings also allow the frame to be inverted for work on an inverted truss. Seven members of the truss are 1a Plane Frame With Strain Gauges With half bridge arrangements. The truss has special end mountings supplied that allow different end bearing conditions to be used, i.e. pinned and roller end.
The truss has been specially designed to be tested in the MAGNUS Test frame. The standard accessories supplied with the are required. Each 1a Plane Frame With Strain Gauges pairing has a cable loom attached and terminated with a numbered connector. The experiment calls for joint deflections to be measured during testing. Safety chains and high level reaction supports are supplied with this apparatus. This connector can be fitted into the optionally available Data Acquisition Interface for direct reading of the member strain during loading.
Experimental Capabilities:
Measurement of strains in members of a fully welded truss
Investigation of reciprocal theorem
Strain gauging of welded structures
Comparison of deflections with theoretical values assuming pin joints
Investigation of reciprocal theorem
Strain gauging of welded structures
Comparison between normal and inverted trusses
The use of strain gauges and strain meters
Measurement of strains in members of a fully welded truss
Comparison of deflections with theoretical values assuming pin joints
Comparison between normal and inverted trusses
The use of strain gauges and strain meters
Drop Forged from Carbon Steel
Hardened and Tempered
