Suitable for both laboratory and field applications battery powered (rechargeble) and fully portable Measurements are indicated on the digital and may be connected to a data logger for later analysis. Propeller Velocity Flowmeter Measurement of velocities in clean conductive fluids within the range 25 to 1500mm/sec (up to 3000mm/sec with high speed probe) Operation in confined spaces with limited intrusive effects.
....
Single phase motors, although less used in the industry than the three phase motors, represent a not significant part in low power applications that use the single phase network. Rarely used in the industry, the single phase universal motor is the motor that is most manufactured in the world, popular in the field of home appliances and in that of portable equipment. At the same power, they are more bulky than three phase motors and their performance and cos are much lower but are simple in construction, cheap in cost, reliable and easy to repair and maintain.
....
The Steam Electrical Generator Trainer uses a natural gas boiler to generate steam which is then expanded in a steam turbine, converting the heat energy of the steam into electrical energy via the turbo-generator. Steam Electrical Generator Trainer demonstrates the conversion of stored chemical energy to electricity the primary method of generating electricity used today. The Steam Power generation Thermodynamics Trainer is purpose designed and built for hands-on education and training on topics related to steam generation, power generation and control.
Steam Electrical Generator Trainer is a real system that generates electricity from a natural gas fuel on a small scale. Steam Electrical Generator Trainer is mounted complete on a single skid allowing for compact installation. Industrial type process components, process measurement and control devices have been used throughout the trainer to provide the student with a realistic training experience using equipment common to industry. In every other respect the system is designed, operated, controlled, and maintained in the same way as the full-scale industrial electrical generating facilities.
The Multi Functional Bench is heated by electricity and it is placed on wheels. That allows installing the unit wherever you want, also in rural areas.
Multi Functional Bench is enough a single bench to set up a laboratory, in fact with you can cook, concentrate and mix, under vacuum or in atmosphere conditions, blanching fruit and vegetables, dosing the product still warm, and pasteurize full and capped vessels.
It is also possible to realize a fixed version of the machine, that in this case, will be connected to an external steam plant.
The Multi Functional Bench is composed of three section:
A pasteurizer tank which, as allowing the thermal treatment of the vessels, could be used to blanch fruit and vegetables using a basket with special holes.
A basin for the under vacuum cooking complete with an agitator, that offers significant advantages in terms of a little oxidation of the product and colour keeping;
A control panel allows you to set all the parameters and save recipes.
A section to dose the product coming from the first section.
Passive Safety Devices For Motorcars simulator allows the study, the testing and the troubleshooting on the devices which have been developed for the purpose of increasing the safety of driver and passengers inside motorcars. The simulator considers all those systems that allow to reduce the consequences of accidents; in particular, the following devices are analyzed:
Air bag (driver bag, passenger bag, side bag, window bag)
Passive Safety Devices For Motorcars simulator allows the Multi-function valve in the fuel tank
It is possible to simulate the behaviour of components and circuits, on the basis of operating conditions that students and teachers can control directly on the panel or through the personal computer. The different not acting safety devices are reproduced on the panel through a synoptic diagram that allows a complete analysis of the components and, in case, of the relevant electrical/electronic control circuit. The latter keeps constantly under control the simulation, by visualizing its behaviour by means of signals and analog and digital meters; in this way the student, through suitable measurements and tests, can proceed to the fault finding activity.
The training system presented here represents a fully functional CIM cell (CIM = Computer Integrated Manufacturing). An overhead robot on a linear drive supplies two CNC machines with raw parts taken from a magazine. The machined dimensions of the finished workpieces are checked in an inspection jig before the items are placed in a finished parts store. The system allows an automated manufacturing process to be created. The demonstrates the basic processes of handling (robots), manufacturing (CNC machining), and control (PLC). Defined planning and control data is used to control various machines. The manufacturing cell is equipped with all necessary sensors and control devices. The control and programming software for the CNC machines, the robot, the linear drive and the software for the PLC (monitoring and control) are installed on two PCs. The relevant data is stored in a software program, and is processed by the control units of the individual machines. A PLC system monitors and controls the process.
....
A compact desktop tray dryer suitable for laboratory use.
Computer control of temperature and air flow rate, with sophisticated data logging and analysis software.
Integrated electronic weight measurement to determine drying rate.
Electronic measurement of air flow.
Stainless Steel Construction.
Electronic measurement of temperature and humidity before and after the drying trays.
Capacity: up to 2.1 Kg of wet material.
Flow rates, 0.4 - 3.0m/s over trays.
Temperatures up to 80°C at 0.4 m/s less at higher flows.
The Base Unit is the core of the range. It includes a hand-operated valve to help give a controllable water flow and a simple return pipe, both colour-coded. The water connections to the optional experiments are self-sealing quick connectors for safety and simplicity. The inlet and outlet fluid streams have different colours to reduce errors. It provides cold water and heater power to the optional experiments and all the instruments needed to measure their performance. The Base Units water system connects to a suitable cold water supply and drain. It also includes sockets for the thermocouples built into each optional experiment. Clear, multi line digital displays on the Base Unit show the temperatures and heater power of each experiment. Changing an experiment takes less than a minute. The Base Unit provides a variable and measured electrical current to the heater in each experiment and works with a safety switch to stop the heater from becoming too hot.
....
These mechanical system fundamentals can be applied to a variety of applications within the automotive, agricultural, and power industries. Portable Mechanical Drives 1 Learning System covers the fundamentals of mechanical transmission systems and applications, such as how to: operate, install, analyze performance, and design basic mechanical transmission systems using chains, vbelts, spur gears, bearings, and couplings.
This power transmission training system uses industrial quality components to help assure that learners are better prepared for what they will encounter on the job and to withstand frequent use. The Portable Mechanical Drives 1 Learning System includes: a tabletop mounting work surface; a drive motor; a variety of components for belt, chain and gear drives; a digital tachometer; a mechanical load device; and an alignment package. The Portable Mechanical Drives 1 Learning System features the ability to setup various drive systems, showing learners the effects of proper alignment and how to obtain best efficiency. These components will be used to cover major mechanical drives topics like shaft speed measurement, key fasteners, power transmission systems, belt drive concepts, chain tensioning, and gear backlash.
Features:
Perfect training for a variety of applications within the automotive, agricultural, and power industries.
Uses industrial quality components to help assure that learners are better prepared for what they will encounter on the job and to withstand frequent use.
Covers the fundamentals of mechanical transmission systems and applications, such as how to: operate, install, analyze performance, and design basic mechanical transmission systems using chains, vbelts, spur gears, bearings, and couplings.
The refrigerator circuit is made of copper pipes. The set of equipment and the vacuum and recharge station allow a fast assembly and disassembly of the refrigerator circuit. The Trainer On Industrial Refrigerators With One Evaporator And An Hermetic Compressor With Fault Simulation allows to study the circuit layout adopted in the normal industrial one-compartment refrigerator systems, fitted with positive temperature evaporator and hermetic compressor. The refrigerant is Freon R134a (HFC), CFC free, and the unit includes the measuring instruments that are necessary to monitor operating parameters and to test the refrigerator circuit. The student can rise his knowledge about the main components of a refrigerator plant, experiment the problems due to the filling and the emptying of the circuit and, at last, simulate some simple fault. A wheeled frame carries a horizontal working panel, fitted with a 80 mm clamp, and a vertical frame, where the main components of the unit and a screen printed synoptic panel are mounted at sight.
....
The Drain Permeameter is suited for use both as a teaching and demonstration tool and for laboratory testing and research. A removable base section is provided into which the filter material to be investigated is placed. The equipment consists of a 100mm diameter transparent column which may be filled with any soil type.
The apparatus is supported on a sturdy metal frame and may be conveniently placed on a laboratory bench close to a water supply and drain. Water is added to the column under a constant head and permeating water and soil is collected at the base. The discharge from the drain can be monitored to assess the efficiency of the filter material.
Capacity: 120 liter (minimum)
RPM: 2800, 50HZ
Volt: 220 V
Current: 9.4 A (minimum)
Power: 2 HP (minimum)
Thermometer Infrared Interface Two Channels K-type thermocouple, logging and printing with two channels and preset for PC connection and software.
....
mm/inch mm/inch mm/inch
Max. Planing width: 330/13 381/15 455/18
Thicknessing capacity: 177/7 177/7 177/7
Length of thickness table: 640/25 1/4 710/28 735/29
Min. Length of workpiece for thicknessing: 254/10 254/10 254/10
Feeding speed (feet per minute): 24 24 24
Cutter block diameter: 95/3.75 95/3.75 95/3.75
Cutter block speed (rpm): 4000 4000 4000
Size of dust collector port-dia: 100/4 100/4 100/4
Power required hp/rpm: 3/1440 3/1440 5/1440
Panel view Plus Learning System will be used to cover major topic areas like application editing, tags and communications, input and output objects, local messages, and alarms, diagnostics, and information messages. The Panel view Plus Learning System adds to the Programmable Controller Troubleshooting Learning System and covers how to program and operate a Panel View Plus 6 1000 HMI operator interface terminal. In addition to this system requires a Control Logix PLC System, PLC Ethernet Learning System Panel view Plus Learning System and Factory Talk View ME Programming Software. The Panel view Plus Learning System includes Panel View Plus 6 1000 with touch screen, Ethernet cable, and mounting console. Human-Machine Interface (HMI) operator stations have become commonplace in modern industry because they eliminate wiring, enable operator functions to be modified in software, and provide the ability for the operator to monitor PLC operations data. This learning system combines industry-standard components for real-world learning and durability and combines it with in-depth curriculum so that learners can practice hands-on skills while gaining the knowledge necessary to understand the reasons behind the skills that they're practicing.
Features:
Panel View Plus 1000 touch screen
Student Reference Guide
ME Studio software
Optional Online eBooks.
Speed measuring with a generator or with an encoder via frequency/voltage converter. Speedreference set by means of potentiometer or selector switches and under PLCcontrol. The system has been designed for the study of programmablelogic control techniques in the control of the speed of a separately excited dcmotor. Possibility of acceleration anddeceleration ramps programming. Pointer meters for motor speed, voltage andarmature current connection to PLC through terminals or connectors. The speed regulation includes two control loops: hardware current loopwith over current limiting and speed loop with external PLC control. The PI controller modulates the PWM circuit that drives the powerstage consisting of switching transistor.
....
It is used both for quantitative measurements and for demonstrating complex stress states. Photoelasticity is a proven method of analysing and recording mechanical stresses and strains in components. The components used are models made of a transparent, photoelastically sensitive plastic, which becomes optically birefringent under mechanical load.
Features:
Generate stress patterns with linear or circular polarised light
Monochromatic or white light.
The Smart Flow Transmitter Learning System includes an industrial quality transmitter and student learning materials for theory and lab. The transmitter mounts to the workstation console and connects to 3 optional flow transducers: pitot tube, venturi, and orifice plate. The Smart Flow Transmitter Learning System adds to Process Control Learning System to provide a 4-20 mA feedback signal that is proportional to the flow rate measured by transducers that sense differential pressure.
Features:
Industrial-quality component
Student Reference Guide
Senses the differential pressure within the system.
All experiment elements are made in special and anodized aluminium.
Friction equipment.
Roller
Block of wheels with roar.
Friction with roar.
Foils of friction.
Set of rollers in a marc.
The simple pendulum.
Principle of wedge.
Bearings.
The set is supplied in plastics box. Oldham coupling and universal joint are used for study of relative angular displacement for the two shafts. Rotary Motion For Two Shafts Set is part of mechanical Engineering Test Series which provides sets for various experiments on Basic Panel (separately supplied) to study or demonstrate specific engineering principles.
....
