The Fuel injection system trainer that demonstrates the working principle of a Teledyne Continental (or TCM) fuel injection system. The carburetor less fuel systems are very commonly used on general aviation aircraft and students must be very familiar with the TCM fuel injection system in order to effectively maintain and troubleshoot the system. The students are trained to apply a logical methodology to locate and identify the fault, and to determine a remedial action to fix the problem. The training value of the is further enhanced by our proprietary computer-based training (CBT), which is included with the equipment. The trainer is built to provide the instructor an effective resource for teaching, as well as to provide hands-on training to the students. The trainer is equipped with instructors panel in the back of the panel that allows the instructor to insert various faults. The CBT is very user friendly due to short text substantiated by clear illustrations and animations. The CBT covers the basic concepts of fuel injection systems with the help of visually rich contents.
....
The system is laid out to depict a typical aircraft electrical system, and contains standard aircraft components and wiring. This is a complete functional simulation of adual-engine 28 V DC electrical system of a typical turbine aircraft. The aircraft electrical system trainer is an ideal resource to teach about an aircraft multi engine electrical system. By using this trainer, students not only learn the functionality of each component, but they also develop logical and systematic approach to perform troubleshooting tasks.
....
The GPS trainer provi desin-depth knowledge and hands-on experience to maintain and troubleshoot GP S equipment. A fault panel lets the instructor insert commonly encountered faults so that trainees can learn how to troubleshoot and repair the GPS equipment in actual situations. GPS has become an indispensable aid for airborne, land and marine navigation. Correct usage and effective maintenance of GPS equipment require a good knowledge of GPS principles, operation and equipment circuitry. Optional system components may be added and interfaced to the system which increase its features and capabilities. Some of these optional components include an external course deviation indicator (CDI) or horizontal situation indicator (HSI), autopilot, and external annunciators. The GPS Trainer equipment consists of a panel mounted IFR- approved GPS receiver, a GPS antenna, and a GPS signal simulator. Asimul at or for altitude input is included to provide full navigation and operational capabilities.
GPS Functional Features:
Panel-mount IFR GPS capable of performing GPS approaches
Eight- channel parallel GPS receiver
Direct- To feature for easy navigation
Easy-to-readmap display
Comprehensive Jeppesen database
Altitude input for increased accuracy
Database can store up to 500 user-defined way points along with user comments for up to 200airports
Capable of B- RNAV compliance.
Can beinter faced to external CDI or HSI, RMI, fuel management system, external moving map display, and air data system
Operates on any voltage 11-33Vdc.
The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. Designed to test three specimens simultaneously.
....
The modular hands-on tray based system is supplied in conjunction with a multi functional Base Unit enabling the student to conduct their own experiments in subjects such as Statics, Dynamics, Mechanisms and Kinematics.
The Engineering Fundamentals range is designed to enable students to gain an understanding of the fundamentals of engineering by the process of learning via hands-on experimentation.
The Simple Mechanisms experiment kit enable sstudents to visualise and understand the different types of mechanical systems and the conversion of linear motion to rotary motion and vice versa.
Each kit is supplied with a highly visual user friendly operational guide, enabling the student to understand the theory of the subject by the application of practical experimentation.
Features And Benefits:
Applied student learning via building and experimentation
Hands-on learning
Clear and concise pictorial assembly instruction senhance the learning experience
Supplied with a detailed instruction manual,covering the theory of Simple Mechanisms including multiple practical experiments designed to further develop the students understanding in this field
Tool less assembly
Multiple experimental capability per self-contained kit.
-lab-81401529.jpg "Torsion Testing Machine (200Nm)")
The apparatus can cater for test specimens of up to 300mm which are inserted between the fixed gearbox and the movable torsion head. Standard hexagon drives are used for transmitting the torque. At the other end of the base frame a Torsion Testing Machine head measures the torsion being applied. The Torsion Testing Machine from the specimen is fed directly into the Data Acquisition Interface supplied using strain-gauging technology. A sturdy bench top mounted unit for Torsion Testing Machine of varying material test specimens to failure/destruction. Using a speed controlled electric motor torque is applied through the drive gearboxes rigidly attached at one end of the base frame. This Data Acquisition Interface display reads directly in Newton metres (Nm). A set of test specimens is supplied as standard. The Data Acquisition software is supplied for capturing the Torsion Testing Machine and allows further manipulation and editing to take place.
Experimental Capabilities:
Torsional testing of different materials, loading up to specimen fracture
Torsional loading to failure of varying material specimens
Comparison between actual and theoretical results
Both Twin Hydraulic Ram System are operated using a hand pump, which is mounted on a mobile table. The digital display is calibrated in Psi. The digital indicator can be moved around the hydraulic table and tilted to give a better viewing angle. A lever on the end of the hand pump allows direction control of the ram between raising and lowering. A digital pressure indicator shows the ram pressure via a transducer.
Twin Hydraulic Ram System Two 20 tonne dual direction rams are each fitted in wheeled carriages that roll along the flanges of the top members of the MAGNUS frame. There are quick acting clamps that lock the carriage in position.
Rectangular mosquito net, polyethylene 120-150 DENIER, treated with WHO PQ qualified insecticide, colour white/blue/green, dimensions 190 x 180 x 180 cm (length x width x height) +/-5%.
....
Intended use:
Various general clinical laboratory usage conditions including; sample preparation, separation, centrifugation, and cold storage.
For clinical laboratory applications. Used to ensure thorough and vigorous mixing of samples and reagents.
....
Used for multiple techniques to accurately dispense required volumes of liquid
8-channel, adjustable pipetting volumes 100-1200ul
Compatible with universal fit pipette tips ranging 100-1000ul
Autoclavable, and Resistant to UV sterilization
Manual air displacement micropipette
A handle with digital setting and read-out of delivered volumes
Built-in tips ejector
Sturdy and chemical resistant parts.
Blood collection for clinical laboratory tests.
Blood collection vacuum tube.
Material: clear non-fragile PET plastic and leak-proof rubber cap.
Plastic shielded rubber cap to protect personnel from direct contact with blood.
Capped, with needle pierceable vacuum seal.
Additive EDTA anticoagulant
Standard color-coded cap.
Applicable for automated analysers.
Sterile.
Blood draw volume 2.0ml.
Pen/Marker writable label space.
Set of winter clothing for child aged 9 years.
....
Vaccine storage capacity: 8 litres
Vacc. carrier Cold box, Small, Short range
With hinged lid and carrying handles.
Cold life at 43°C without openings: 84 hours 7 minutes
Supplied with 15 x 0.3L icepacks as a standard.
Weight fully loaded: 22.41 Kg
Vaccine storage capacity: 51 L
Volume category: <60L
Refrigerant: R600a, 45 grams
Energy consumption, stable running (kWh/24 hours): 1.63
Equipment operating voltage and frequency: 220-240 Volt, or 100-127 Volt and frequency 50Hz or 60Hz, 1ph.
Operating temperature: Min and Max rated ambient temperature: +10°C and +43°C
UIFPF- Grade A
Prequalified Intermittent Mains Powered Refrigerator for storage of vaccines at +2 ?C to+8?C.
Volume category: <60L
Vaccine storage capacity: 37.5L
Operating temperature: Min and Max rated ambient temperature: +5 °C and +43°C
UIFPF: Grade A
Refrigerant: R600a, 90 grams
Solar radiation reference period of 3.5 kWh/m²/day and hot zone (+43°C) test temperatures.
PQS prequalified Solar direct drive combined refrigerator and freezer with no battery for storage of vaccines at +2 ?C to+8?C and freezing of ice packs in areas without any electricity, or where there is less than eight hours of reliable electricity over a typical day.
Remote Temperature Monitoring (RTM) system for real time monitoring of storage conditions at different levels of the vaccine cold chain: (a) with automatic transmission of data to a server (b) with integrated audio-visual alarm (c) capable of alarm notifications via SMS and/or email (d) with data access, setup of alarm thresholds and setup of alarm recipients through internet accessible dashboard (e) configurable to suit specific applications and scalable to allow for the later installation of additional temperature monitoring products and/or storage facilities.
....
Cabinet Type: Upright
Capacity: 578L
Adjustable cabinet temperature set point -40°C to -86°C
Volume Category: ≥ 300 <600L
Storage temperature: up to-86°C
Operating ambient temperature: +10 °C - +32°C (Temperate zone)
Power requirement: 220-240V/50Hz.
The paper should be easily removed from the pad.
The composition of the paper, design and the method of attachment must be suitable for the safe and extended use by children.
Recycled paper
Paper: 75% recovered paper fibres (post and pre-consumer waste) non coated 110 GSM. The composition of the paper should be homogenous with no inclusions/alien particles or wrinkles.
Cover: There is no cover sheet on the front of the pad.
Finishing: Top glue along the 297 mm side, using an A3 size piece of cardboard, 600 GSM, attached to the back of the pad. Trim to size.
Size: A3 (420 mm long x 297 mm wide).
Pages: 48 sheets
Printing: no printing.
Arabic Student Kit for Grades 1 to 4.
....
