Chisel Mortiser Wood working Machine
....
Automated Orbital Shaker Incubator
....
Classroom DNA Electrophoresis Lab Station
....
Welding suit PVC - Full Body Heavy duty Washers Dry Suit
....
Laboratory Deionizer output - 510/8hrs UHQPS
....
Liquid Chemical Reaction Vessel
....
The primary separation operation for crude oil occurs when the crude stream flows through a vessel of sufficient capacity to allow gravitational separation of the gas, liquid hydrocarbon and water phases. This fluid mixture then flows into a horizontal separator vessel fabricated of clear PVC. Gas flow passes through a secondary vertical 2-phase separator. This process trainer blends air, water and refined oil to emulate a crude oil stream. The entire trainer is controlled from an optional distributed control system or dedicated control panel. The separator is equipped with industry-typical process measurement devices.
....
Drying lines for vegetables
Static batch dryers suitable to process tomatoes and any kind of fruits. Therefore, we are able to supply complete drying lines as well as equipment for product preparation as washing units, cutting machines and distribution systems of the products on drying trays.
Tomato processing
We can provide single machines or complete lines for the preparation of tomato passata, tomato sauces, tomato paste and ketchup. Also for this kind of line we study tailor made solution for customers, both big industries and small and medium producers.
Preserved vegetables in oil or vinegar
Complete lines or single machines for processing vegetables in preserved products, in oil, vinegar and brine. Mainly equipment of smallmedium capacity but as usual always design according to the real customer needs.
Engine Control System Bosch Motronic demonstration panel represents direct petrol injection system MOTRONIC. Integrated engine control system shows different operation modes of the fuel injection/ignition system and the trainer is based on OEM components of Audi/VW.
The main characteristics and functions of the Engine Control System Bosch Motronic trainer are:
Integrated engine control system with direct petrol injection.
Manual adjustment of the engine crankshaft speed.
Electric wiring diagram with built-in banana plug jumpers for measurements and simulation of system fault codes.
Possibility to simulate more than 20 faults by disconnecting banana plug jumpers
Intake manifold flap regulation (vacuum pump is required; optional).
Monitoring operation of fuel supply system, injected fuel quantity, spray pattern quality, fuel pressure of the fuel pump.
Visible work process of spark plugs.
Easy access for high voltage measurements.
Low pressure fuel pump in a transparent tank which allows to see its operation.
Complete electric wiring diagram of direct petrol injection system
The Engine Control System Bosch Motronic trainer has the following diagnostic and measurement features:
Diagnosis through OBD 16 in diagnostic connector
Electronic control unit (ECU) identification
Displaying the operating system parameters (live data)
Control unit diagnosis
Control unit encoding/configuration
Reading/erasing fault codes
Possibility to measure electrical signal parameters of each system component (such as sensor or actuator)
Possibility to measure high voltage circuit of the ignition system
Activating the actuators (depending on the control unit)
Throttle valve adaptation
Possibility to measure the parameters of the system connecting to the banana connector.
This experimental unit forms part of a series of teaching systems developed in collaboration with the Department of Automation and Information Technology at the Harz University of Applied Studies and Research. A fuzzy control will be developed and optimised for this purpose. The inclination of the pendulum is measured by a potentiometer. The unstable "inverted pendulum" system acts as a mechanical single-variable system. The upright position of the pendulum is adjusted by two independent propeller drives and should be achieved quickly and if possible without overshooting. This output value controls the actuators, two propeller drives. The sensor supplies a crisp signal to the fuzzy controller, where the signal is transformed into a fuzzy input value and inferenced before being transformed back into a crisp output value.
....
Comprises both wetted wall column and a deoxygenating column, a water tank, two water pumps, an air pump and an oxygen meter with two probes.
A floor standing apparatus, used for demonstration and determination of liquid film mass transfer coefficients.
The deoxygenating column is 1570mm long, 26mm internal diameter, and made of clear acrylic.
The wetted wall section is 900mm long, 32mm internal diameter, and made of glass.
The equipment is used to study absorption of oxygen from air into deoxygenated water, specific demonstrations include:
Calculation of liquid film mass transfer coefficient
Determination of the power law relationship
Variation of this coefficient with mass flow rate.
The boiler produces steam to turn a two-cylinder steam motor. The used steam from the motor outlet passes through a mains water-cooled condenser, then down to a waste tank or to a measuring vessel (supplied). The equipment includes all instruments needed for the experiments. A mobile frame contains all the parts of the test set. An electric pump draws from a reservoir to deliver water to an electrically-heated boiler. The boiler includes a safety valve, water level gauge and blow-downcock. Thermocouples connect to a digital temperature display to measure and display temperatures at key points in the test set. Athrottling calorimeter allows students to measure the dryness fraction of the steam. Two mechanical gauges show the boiler and engine inlet pressures. These include a band-brake dynamometer with a digital torque and speed display, to measure and display motor speed, torque and power. A meter shows the electrical power supplied to the heaters in the boiler.
A mobile laboratory-scale steam plant for experiments in thermo dynamic principles. It helps students to understand:
Steady flow energy equation
Thermal efficiency and the control surface
Thermodynamic laws of energy conservation
The Willans line
Rankine Cycle Analysis.
Roller-pack bearings are precision bearings made specifically for the machine tool axes to provide precision positioning of the axis under heavy load. The Roller Pack Machine Tool Axis Learning System adds Mechanical Drives 1 Learning Systems to teach machine tool axis drives based on the roller-pack type bearing. Students will learn industry-relevant skills related to this new topic including operation, installation, performance analysis, troubleshooting, and design.
The axis can also be combined with the ball screw components of the Mechanical Drives 4 System to become a fully operational machine tool axis. The Roller Pack Machine Tool Axis Learning System includes 12 roller-pack bearings and other components to assemble a machine tool axis; student learning materials for both theory and lab, and teachers guide.
Features:
Industry-relevant skills
Teaches machine tool axis drives based on the roller-pack type bearing.
This type of plant is particularly suitable to filter both milk and fruit juices and it can be generally employed for any liquid-solid mixture (not soluble).
Exercises of Press Filter
Filtering efficiency as a function of treated product turbidity
Introduction in a pilot line for producing pasteurized milk or juices
Filtering efficiency as a function of delivery pressure
Filtering efficiency as a function of feeding flow rate
Electrically or manually operated gates allow simulating the fresh air inlet and the presence of one user. Two heat exchangers are assembled inside the air distribution system which allow varying the cooling or heating capacities. The Central Climatization System simulates the indoor air treatment for buildings such as hospitals, schools, hotels.Two fans - one at the air inlet, one at the air outlet - generate an air flow passing in an air distribution system, which has theshape of an H. The unit is supplied with a manual that describes each component of the system, installation and utilization procedures. A chiller complete with a reverse cycle valve feeds the two exchangers with hot or cold water according to the selectedcycle.
Experiments:
Study of a chiller and its functioning as a heat pump
Study of air flow and air flow measurements.
Influence of fresh air inlet
Influence of the air flow
Summer air conditioning
Winter air conditioning.
Measurement of rates of water penetration into the soil is aided by a grid on the tank front. The equipment is self-contained with a sump tank, pump and flowmeter fitted behind the tank. Water may be discharged along the soil surface or directed to twin drip nozzles to demonstrate trickle irrigation.
Removable end plates allow soil samples to be changed quickly and easily.
The apparatus consists of a narrow transparent fronted tank which may be partially filled with any soil type. It is supported on a bench mounted frame.
A simple measure of whether the liquid is filterable is useful to enable assessment of filtration as an appropriate process, if so what type of pre-treatment and filter media are required. The use of deep beds of porous granular media to filter liquids to improve their clarity is widespread in municipal and industrial practice. Other liquids are filtered through granular media in the processing of beverages and food products for example. Predominant is the filtration of drinking water and industrial water, although the filtration of sewage as a tertiary stage of treatment is increasing. Although the normal methods of chemical and physical analysis such as suspended solids content, turbidity, color etc. may, with experience, indicate whether a suspension is filterable, they give no direct measure of this property.
The Filter ability Index Unit utilizes a bed of granular material, normally sand, which can be chosen by the investigator to suit his own purposes. The measurements taken with this apparatus enable a filter ability number to be calculated which has significance in deep bed filter performance.
A number of measures of filter ability have been proposed, using woven micromesh, lint pads or membrane filters, which have application where these materials represent, or are identical to, the filter media to be used. However none of them is representative of porous granular filter media, such as sand, consequently they are not applicable to deep bed filtration.
The Filter ability Index Unit is not intended for filter design purposes. That requires pilot filter column equipment such as the Deep Bed Filter Column. However preliminary assessment of pre-treatment processes, and possible filter media with the Filter ability Index Unit will reduce the amount of testing required with pilot filter columns.
Demonstration:
Pressurebuild-up
Function inthe event of a failure of any brake circuit
Sliding thepressure rod piston
Differentialand tracking bore function
Closing thepressure chamber.
